Visual Productions forum
Products => Builder & Personality file requests => Topic started by: DarkAngel on July 08, 2010, 06:11:18 PM
-
Hi,
I add the DMX- Tables as picture.I need the file until 15.07.2010.
(http://s5.directupload.net/images/100708/ugj928y3.jpg) (http://www.directupload.net)
(http://s3.directupload.net/images/100708/temp/y3stxspd.jpg) (http://s3.directupload.net/file/d/2214/y3stxspd_jpg.htm)
Thank you.
-
Please find the personality file attached.
Instructions at http://www.visualproductions.nl/forum/index.php?topic=857.0
[attachment deleted by admin]
-
Hi,
thank you for the file. I could add the fixture to cuelux, but I can only modify the Dimmer and the Strobe. It is impossible to modify the colors (red, blue, green). I tried the 27 channel mode. The DMX-adresses are correctly configured.
-
Hi,
tried all other DMX-modes. The problem is the same.
-
Please take into account that a RGB fixture in Cuelux also has a virtual dimmer (this might be a bit confusing as the main fixture has a dimmer as well). So if you set the RGB color for a sub the DMX values remain 0 when the sub's dimmer is set to 0%.
-
Hi,
it works. thank you.
Greeting Florian
-
hi
I also use the lightmaxx color bar and i found there was one feature missing
if you use the macro function there are 2 macros from 220 till 241 which permit you to select the color of the macro
this was not included in the cuelux fixture
i added it by myself and it works fine
if you want you can download it here and to take no risk i called it lightmaxx2 so there is no confusion with the original lightmaxx library
i also added the lightmaxx Mech 5 which is actually the same as the stairville mh575 s
http://files.me.com/amonschauer/xjxtn4
-
Thank you, I have included the Mech 5 in the library.
The second macro channel in the color bar is tricky; it shares the same channel as RED. So you would need to take this channel down to correctly operate the RGB mode; that's why I didn't include it. But if it works for you, then please use it as you like.
regards,
Maarten
-
hi i think this should not be a problem as the rgb mode is only in the subfixture ... or i use only macro and then i have the color change in the macro mode or i use rgb in the subfixture ... this shouldnt interfear in any way