Visual Productions forum

Products => Builder & Personality file requests => Topic started by: adamipswich on July 08, 2011, 06:00:02 PM

Title: Martin MX-4 Scanner personality - missing gobo and colour scroll
Post by: adamipswich on July 08, 2011, 06:00:02 PM
Hi CueLux team. I have some Martin MX-4 scans and it's great that the fixture patch is already built into Cuelux. It seems that the gobo and colour scroll features are not setup correctly. Can you please add these in when you have time (no rush). I did download the builder application but got lost! I would appreciate it if you could add the gobo/colour wheel scrolls into the patch.

Thanks & Best Wishes,
Adam
Title: Re: Martin MX-4 Scanner personality - missing gobo and colour scroll
Post by: Maarten Engels on July 11, 2011, 08:20:18 AM
hi Adam,

I just looked into the manual of the MX-4; it does not mention gobo or colour scroll features. Can you tell me which DMX channels/ranges make the gobo and colour wheels scroll?
Title: Re: Martin MX-4 Scanner personality - missing gobo and colour scroll
Post by: adamipswich on July 11, 2011, 11:12:58 AM
Thanks Maarten for taking a look at the manual. It says that 'Movement speed can be controlled on channel 7, if enabled.' though the colour wheel is on chanel 2 and gobo wheel channel 3 so I'm not sure if the cuelux scrolls can be applied to this channels.

Thanks!
- Adam
Title: Re: Martin MX-4 Scanner personality - missing gobo and colour scroll
Post by: Maarten Engels on July 18, 2011, 09:15:06 AM
hi Adam,

Please find the file attached. Channel 7 is assigned to 'custom' fader so you can control this channel and see what it does.

Instructions @ http://www.visualproductions.nl/forum/index.php?topic=857.0