Visual Productions forum
Products => CueCore, QuadCore, IoCore, TimeCore & B-Station => Topic started by: patric on April 01, 2012, 08:28:08 PM
-
On Cuecore is there a way of using the 4GPIs to trigger a cue save? GPI 1 saves the DMX input to cue 1, GPI 2 saves to cue 2 ans so on.
-
Yes that is possible from firmware v1.22.
For each GPI action add the following tasks:
- Console - "Jump" to cue X
- Console - "Capture from DMX" (no parameters)