Visual Productions forum
Products => CueCore, QuadCore, IoCore, TimeCore & B-Station => Topic started by: Dennis Kromhout on December 11, 2013, 04:26:12 PM
-
/****************************************************************************************
* RELEASE 1.3.56
****************************************************************************************/
Release Date : 2013 December 11
vManager changes:
- Updated MAC address database
- Support for Ubuntu 13.10 64 Bit
CueCore v1.60 :
- Added command to disconnect from master
- Changed the Console's internal resolution to work better for slow
fades
- UDP action source can now contain value, the trigger & value are
separated by '=' sign. Total length is still limited to 15 characters
Example: trigger=value
If your programming did contain the '=' sign then it should be updated
manually to no longer use the '='
CueCore v1.62 :
- Fixed issue introduced in v1.60 causing the fade only to work on first
few channels
B-Station v1.06:- UDP action source can now contain value, see release notes for CueCore
v1.60
- Added command to disconnect from master
- Fixed LED intensity toggle.
NOTE : Always make a backup of your configuration before performing a firmware
upgrade.
/****************************************************************************************
* RELEASE 1.3.52
****************************************************************************************/
Release Date : 2013 November 19
vManager changes:
- Changed firmware select dialog to show non compatiable firmware in
different colour
IoCore v1.23 :
- Added timer function, this can be set to an amount of time & started
using separated tasks. After it has been expired it will generate a "Up"
trigger.
- Added trigger on variable value match.
CueCore v1.59 :
- Added trigger on variable value match
- Fixed issue causing timecode actions being re-triggered when using
internal timecode
B-Station v1.04:- Added "Buttons -> OSC Toggle" template
- Fixed issue in "Buttons -> 6 Cuelists" template causing the LED
intensity to be set at 0%
B-Station v1.05:- Changed "Buttons -> 6 Cuelists" template to no longer blink the LEDs
incase of pause. Old template is now named "Buttons -> 6 Cuelists
Advanced"
- Added "Active" trigger for Cuelists, this is a simplified version of
Playing and is only triggered when Cuelist becomes active or gets
released
- Renamed "Playing" trigger to "Status"
- Added feature "Solo Flash" for LEDs
- Added template for short & long button press without any Action Tasks
- Fixed issue causing the trigger value to be re-initialized when changing
trigger type from "Channel" to "Long Press"
/****************************************************************************************
* RELEASE 1.3.50
****************************************************************************************/
Release Date : 2013 Oktober 21
IoCore v1.22 :
- Fixed issue resulting in Action & Actionlist tasks being reset to
default after reboot
- Fixed issue causing no Art-Net output after reboot
CueCore v1.58 :
- Added Erase feature for Recorder task
- Added Control Variable function for Console task
- Fixed issue resulting in Action & Actionlist tasks being reset to
default after reboot
- Fixed issue causing no Art-Net output after reboot
B-Station v1.03 :
- Fixed Up/Down refresh issue for Action Tasks
- Fixed issue resulting in Action & Actionlist tasks being reset to
default after reboot
vManager is available on our main (http://www.visualproductions.nl/downloads.html) download page.