Visual Productions forum

Products => Builder & Personality file requests => Topic started by: Klaus on April 05, 2014, 07:04:07 PM

Title: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on April 05, 2014, 07:04:07 PM
Here is the dmx...

http://www.redmountain.ch/Proel%20plledmlw18v2.pdf

Thanks and best regards

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Dennis Kromhout on April 07, 2014, 09:15:13 AM
Hello,

Here is the file.
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on April 07, 2014, 09:37:11 AM
Thank you !

best regards

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on July 26, 2016, 08:47:58 AM
Hello,

Here is the file.

Hi Dennis
I'm having trouble with this file, fine / tilt and fine / pan seems not to be included, but the 'programmer section' in Cuelux ( 96 ) works , somewhat ...
Tilt on a fader in Cuelux gives me a 100% tilt on the device with every dmx value > 0.
I have to use FX / tilt - size / phase to be able to control the movement fine
Is this a Cuelux or a fixture problem ?
Thank you for response and
best regards

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Julien Levaufre on July 26, 2016, 03:20:33 PM
sorry to hear that,
I've just checked the fixture file and it fits exactly the manual you sent me...
SO maybe this manual get a mistake. At least make your own dmx chart and i will update the fixture file.
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on July 26, 2016, 09:13:06 PM
Maybe I was unclear...
In the programer section, if I tilt, the device follows as should.
If I record this to a fader, as soon as I move the fader up, I get 100% tilt, not gradually...
If I use the FX tilt with no speed, it works...
?
Thanks
Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on July 26, 2016, 09:41:27 PM
Update...
I created this Cue in an earlier version of Cuelux, and copy/pasted it into the Cues on the newer version ( 96 )
I just recorded the tilt into an empty space and it works.
Cleared the play button that didn't work, re-recorded the tilt and it works.
?
I copy/ pasted the pan(s) in the same manner, and they work.
?
Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Julien Levaufre on July 27, 2016, 08:15:24 AM
ok, sorry, you are right i did not get your problem the first time...
The thing is that as i do not have your fixture with me i cannot really do test, but i will transfert your problem to the developer team, maybe they will be able to help us a litlle bite more! ;D
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on July 27, 2016, 08:36:55 AM
Thanks Julien
An 'how to transfer Cues/stacks' would be welcome too  ;)
Best regards

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Julien Levaufre on July 27, 2016, 03:03:04 PM
what do you mean by "transfert"?
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on July 27, 2016, 06:31:05 PM
Transfer from one Cuelux file to another one, no matter what, patches, cues, stacks...
or include / exclude settings / fixtures on the working file,
copy / paste doesn't work everywhere, and undo neither
at least here it happened.
Also some cues were only loaded after 2 or 3 times starting Cuelux...
Thanks
Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Julien Levaufre on July 28, 2016, 09:03:00 AM
so if i understand your ight, you want to be able to cpy past come cues from 1 cuelux file to another cuelix file???
This looks like a little bite strange as your 2 files need to be quite the same because of the patch and so i do not understand too much why to do this...
But, the easiest way to do it is not using cuelux as you cannot copy an entire cuelist using the copy past to go from one file to an other one.
To do it easily just open your show file from a texte editor, all your cuelist will be record between
<cuelist label="XXX" loop="true" bounce="false" random="false" chase="false" release_time="00-00-00-00">
......
.....
....

 </cuelist>
 just select the cuelist you need and copy past the block into your new showfile in the <cuelists> section.
I hoppe this will help you
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on July 28, 2016, 07:22:28 PM
Yes, i.e. I want to use a file from last month, but include a cuelist from yesterday...
BTW
copy / paste works inside the cuelist window ( from 1 file to another )
No need to use an editor, and using an editor isn't exactly coole when you are in a hurry...
Now :
How can I copy a programer setting of one fixture  to another one ?
The copy / paste buttons are there... ;D
Could go like this :
Select a fixture to copy from, push copy, select a fixture to copy to, push paste.
Maybe this is possible already and I haven't found a way...
Thank you

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Julien Levaufre on July 29, 2016, 03:52:00 PM
ok, so i've just tested, and the copy past for the programmer of one fixture to an other one works fine...
I tested V1.3.94 and v1.3.96 and it works for both.
Here is waht i've done:
select the first fixture
edit the programmer as you want
click copy
unselect the first fixture and select the second one
click past
hop, it's done!
I hoppe this will be ok for you,
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on July 29, 2016, 07:15:34 PM
Thanks Julien, I will try this one...
I tried copying from an already programed fixture to another - the same kind- one, and
it wouldn't take 'everything', i.e. FX not, or position not, or dimmer value not, kind of unforeseeable
I also tried:
Select fixture to copy from
press load
press play button ( on the upper row, not the fader play buttons )
Press copy
deselect fixture
select fixture to paste to
press paste.
no - luck
Best

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on July 29, 2016, 09:15:50 PM
...just happened again,
upon reboot and launching Cuelux ( 96 ) the fixtures I was working before ( remember, trying copy / paste ), didn't show up on the main screen.
I think there is something finicky going on...maybe with caching or some memory leak ?

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Julien Levaufre on August 03, 2016, 08:18:20 AM
sorry for delay, i've made some teste about your copy/past problem.
It appaears that on the v96 the copy past do not work when you try to copy loaded values...It's a bug, and i will report it directly to the develloper team.
I tried previously with the v94 and it was working fine.
ABout the missing fixture when startting back cuelux, i've made 5 tests and i never lost any fixture... so for now i cannot help you with this! ;)
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on August 03, 2016, 08:19:42 AM
Thank you !
Best regards

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on January 22, 2017, 10:23:42 PM
Hello,

Here is the file.

Hi Dennis again  ;)
ch 7 should be treated as fader, ( fade thru colors )
How can this be done ?
Now it is treated as fixed separate colors…in Cuelux 1.3.96
Thank you and best regards

Klaus
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Julien Levaufre on January 23, 2017, 10:42:37 AM
i cannot open back the dmx chart of your fixture, so i cannot check...
but please try this file and tell me if it's ok for you!  ;)
Title: Re: Need file : Proel 20plledmlw18v2 Mini Wash moving led
Post by: Klaus on January 23, 2017, 01:26:23 PM
Yep, works

Thank you

Best regards

Klaus