Visual Productions forum

Products => Cuelux => Topic started by: zobelmcgmurf on April 02, 2015, 11:10:36 AM

Title: Using Cuelux with the Enttec OpenDMX Ethernet Interface
Post by: zobelmcgmurf on April 02, 2015, 11:10:36 AM
Hi Folks,
in case of purchasing the Cuelux Software I would to know to using the OpenDMX Ethernet Interface with the Cuelux Software.
In my configuration it will be using a WiFi-Network to bridge from FOH to the Stage.
Sorry about my bad english…
Best regards

Andreas from Germany
Title: Re: Using Cuelux with the Enttec OpenDMX Ethernet Interface
Post by: Julien Levaufre on April 02, 2015, 01:49:27 PM
hi, you can download the cuelux software for free on our website. But it works only with our own interface, the cuecable..
Title: Re: Using Cuelux with the Enttec OpenDMX Ethernet Interface
Post by: Boyd Nijsten on April 02, 2015, 05:47:04 PM
You can use the OpenDMX interface as ArtNet node on stage. But you have to connect a CueCable to unlock ArtNet in Cuelux. The CueCable and Enttec ODE will give the exact same output.