Visual Productions forum

Products => Cuety & LPU => Topic started by: Robin s on February 13, 2016, 10:13:22 PM

Title: moving head home stand
Post by: Robin s on February 13, 2016, 10:13:22 PM
Hey i have made with v builder a program for my mh but when i start the cuety app my mh automatic stands in the middle position . It's mean the light shine to the roof , (tilt : 0 pan 0 ) .
But normally with a dmx scenesetter panneel is the position of the mh with zero position to the centre of the ground . Tis is much better
i have now the problem that when i the fx take the mh to the roof shine's . Example circle : mh shine's circles but to the roof not in front of hem . Please help me , i have in builder de degrees from 630 pan to 530 degrees but it doesn't matter .
Or must i change the dmx channel from the pan tilt from 255 to 127 ?
Title: Re: moving head home stand
Post by: Julien Levaufre on February 15, 2016, 08:42:26 AM
this kind of home position is a standard in the professional light contrlers. if you need your fx to be centered in an other place you just need to change the position onformation on the grip of the programmer.. this position will become the new center of the fx.