Visual Productions forum
Products => CueluxPro => Topic started by: Steffenlight on July 11, 2018, 10:56:09 PM
-
Hi,
when i push reset "speed" with works fine
when i push reset "attack" works fine
when i push reset "FX speed" it switch to -100 and not how expectet to zero.
Can i adjust this or is it a feature that i not understand ;-)
Also the default for a new cue is speed by a chase set to 1/8 not to 1/1 than i expect? Feature?
-
Hello @Steffenlight,
when i push reset "FX speed" it switch to -100 and not how expectet to zero.
This does sound like a bug, I will put it on the list and hopefully we can address it soon.
Also the default for a new cue is speed by a chase set to 1/8 not to 1/1 than i expect? Feature?
This also sounds like a bug, although I could not reproduce it. If you could share some more information on how you did made it happen, that would be very helpful.
Greetings,
Michael.
-
I record a new Cue with the programmer. Dimmer 100%, Red 100%, Position FX circle and Speed 20 and Phase 50.
The Cue has only one Step assigned to a Fader at the BCF-2000. When i modify the FX-Speed and want to reset it - the FX Speed jump to -100 not than expectet at "0".
In my test i see also that the Attack set to 50% and not than expectet to "0" as default.
-
Hello @ Steffenlight,
Thank your for your feedback, this information would hopefully help us to reproduce it easier.
Greetings,
Michael.
-
Update: when i record a chase with more steps then the reset works fine and set nearly everything to default. Speed to 1/1, Attack to 50% but the FX-Speed also to -100%
-
Hello @ Steffenlight,
It would be really helpful if you could send us a report with the showfile and this steps to our email support@visualproductions.nl
Greetings,
Michael
-
Next week i give you a ZIP from all with some Screenshots...
Now i have to program a gig first ;-)
-
Hello @Steffenlight,
Good luck with your gig, ;)
Greetings,
Michael.
-
So on - no sleep the last weekend.
It was tricky to use teh FX-Speed with the BCF-2000 without easy reset to default. I store the files to a stick and send them tomorrow to Visual Productions. But this is a nice Tool to adjust the Speed live in the show.
Also it would be so fine when the FX-Generator also can produce single CUE-Steps - this will be easy on beatcontroled Shows with an exakt syncron move on each moving fixture. At this time i has 50/50 Cuelist with FX and manual with chase mode. (Hard work)
-
Hello @ Steffenlight,
I will added on the Wishlist.
Greetings,
Michael.