Visual Productions forum

Products => CueluxPro => Topic started by: jamte on November 04, 2019, 09:37:24 PM

Title: Supern00b question
Post by: jamte on November 04, 2019, 09:37:24 PM
Hello there.
Please excuse the following probably dumb or RTFM questions, and fee free to quote the rtfm part.
But:
I want to put single parameters from single fixtures on direct faders.

Meaning:
Strobe 1:
Dimmer - fader 1
Rate - fader 2
Duration - fader 3

Strobe 2:
Dimmer - fader 4
Rate - fader 5
Duration - fader 6

Martin Viper:
Dimmer - fader 7

MDG hazers - fader 8

How do I do something as simple as that? I can add fixtures and do lots of stuff, Iīm not completely lost, but I canīt really catch how to assign parameters to faders, directly.
Title: Re: Supern00b question
Post by: Bootsy van der Zande on November 05, 2019, 10:29:16 AM
Hi,

If I understand correctly, you can just set the function you want to 100% and record it to a fader using the Record button. Make sure you clear the programmer first, so you don't record anything else in there.
Next you can set the fader settings by double clicking the cuelist above the play button. Tip: You probably want something like Fader start set to ON.

Greetings,
Bootsy
Title: Re: Supern00b question
Post by: jamte on November 07, 2019, 05:54:40 PM
Thanks! Still navigating the interface a bit :)