Visual Productions forum

Products => Builder & Personality file requests => Topic started by: Daan1974 on March 22, 2020, 01:48:47 AM

Title: Fixture Request: Showtec RP-405 MKII
Post by: Daan1974 on March 22, 2020, 01:48:47 AM
Hello,

Please the fixture file for the Showtec RP-405 MKII (Relay Switchpack, 4 channels)

I have selected the Showtec Multiswitch from the library in ceulux but this fixture starts "On" at value 255 on all 4 channels
I want my switch be at value "0" so there will be no 230V on the output when cuelux starts.
Is it possible to switch on/off by using one button?

Thanks Daniel
Title: Re: Fixture Request: Showtec RP-405 MKII
Post by: Julien Levaufre on March 23, 2020, 05:03:52 AM
Please find included the fixture file for your fixture.
Sadly it will be the same behavior than with the other fixture file as the switch control is on the shutter function, and cuelux default is shutter open.
So you can control your switch with the shutter button in the beam page of the programmer and if you want  the shutter to be always closed (off) you can create a cuelist where you set all switches to off, then set this cuelist as "background". This way your switches will always be off except when you will have a cuelist asking to turn them on.
I hope this will help you,
Enjoy ;)
Title: Re: Fixture Request: Showtec RP-405 MKII
Post by: Daan1974 on March 24, 2020, 12:40:40 PM
Works!! Thanks
Title: Re: Fixture Request: Showtec RP-405 MKII
Post by: Julien Levaufre on March 25, 2020, 01:31:38 AM
Great, thank you for feedback!