Visual Productions forum

Products => Builder & Personality file requests => Topic started by: MylesAway on November 12, 2021, 08:45:54 PM

Title: Elation Platinum HFX Standard
Post by: MylesAway on November 12, 2021, 08:45:54 PM
Hey there, I have tried to fix these issues in vBuilder but I have only had luck by deleting the Auto slider.

Issue 1: On boot channel 19 defaults at 100 which makes the lights start an auto program. Deleting the Auto slider in vBuilder resolved this but also removes access to the auto programs. I am not sure how to have the default value set to 0/

Issue 2: Lamp On/Off, neither works, I can't seem to find the correct way to program this function in vBuilder, I have tried multiple options but none change the value on Channel 19.

Thanks!
Title: Re: Elation Platinum HFX Standard
Post by: Julien Levaufre on November 13, 2021, 06:15:21 AM
I did some modifications on the file and checked on cuelux.
Checking on the dmx monitor the channel 19 stay at 0 on boot and the lamp on/off buttons are sending the right values.
I did only the changes on the "standard" mode as it seems this is the one your are using.
I hope this will be ok for you
enjoy ;)
Title: Re: Elation Platinum HFX Standard
Post by: MylesAway on November 14, 2021, 05:01:40 AM
Fantastic! I wish I knew how you did it. Thank you!!
Title: Re: Elation Platinum HFX Standard
Post by: Julien Levaufre on November 14, 2021, 09:36:59 AM
Glad it worked.
As you did I took out the custom fader on channel 19 and replaced it by the macro parameter.
As Macro Parameter was used for iris macro I put a custom fader to control this feature.