Visual Productions forum

Recent Posts

Pages: 1 [2] 3 4 ... 10
11
Builder & Personality file requests / Cameo Hydrabeam 4000 RGBW
« Last post by jrw on February 22, 2021, 10:41:30 AM »
Topic name
Cameo HYDRABEAM 4000 - CLHB4000RGBW

User Manual or DMX Protocol table
https://www.adamhall.com/shop/de-de/downloads/file/id/-1293726726

Software
Cuety LPU1

Thanks :)
12
Builder & Personality file requests / Re: Propar hex 5 file
« Last post by rolfnagtzaam on February 19, 2021, 07:38:58 PM »
Thanks! 👌🏻
13
Cuelux / Re: Blinder on Akai MPD218
« Last post by ianbar on February 18, 2021, 04:43:52 PM »
HI Bootsy,

Putting it on a fader-playback worked using "ButtonPrimair".
Thanks for your help!
14
Cuelux / Re: Blinder on Akai MPD218
« Last post by Bootsy van der Zande on February 18, 2021, 10:19:06 AM »
Hi,

I think the easiest would be to put it on a fader-playback, this way you can enable "fader start" and control it with "Playback Direct Fader <1 through 64>" and "LevelPrimair". I believe this does not work for playback buttons as they always have the intensity at 100%.

Another way could be to change. the midimap to use "Down" and "Up" to go+(ButtonSecundair) or release(ButtonQuadruple) the playback, instead of the "Control" that you are using right now. But I haven't tested this, and I am not 100% sure Cuelux supports the "Down" and "Up"

It would be something like this:

Code: [Select]
<action>
    <trigger type="Midi" specifier="Down">Channel X - Message 9 - Index 36</trigger>
    <tasks>
        <task type="Playback Direct Button 07" feature="ButtonSecundair" function ="Control"/>
    </tasks>
 </action>

<action>
    <trigger type="Midi" specifier="Up">Channel X - Message 9 - Index 36</trigger>
    <tasks>
        <task type="Playback Direct Button 07" feature="ButtonQuadruple" function ="Control"/>
    </tasks>
 </action>

I'm afraid I did not have time to test this, and also it depends on what your Akai sends for midi messages. But I give it a good chance of working :)

Greetings,
Bootsy
15
Cuety & LPU / Re: Macro channel in Cuety
« Last post by Bootsy van der Zande on February 18, 2021, 10:04:12 AM »
Hi,

Cuety does not have a macro channel. But you can use it if you want, there are two ways.
You can edit the personality to add the macro channel to a different fader, for example the gobo fader. This is done using vBuilder, but it is a bit tricky.

The easy way is to just patch a single dimmer fixture on the channel that you are missing. It will show the address in red, because you are overlapping with the Showtec fixture but as long as the channel is unused on that it should all work nicely!
So if you patch the Showtec Compact par at address 1, you can patch a dimmer fixture on channel 6. It will control the macro channel.  (Just add 5 to the start address of the Showtec fixture to get the macro channel)

Greetings,
Bootsy
16
General / Re: add custom gobo to fixture file
« Last post by Bootsy van der Zande on February 18, 2021, 09:27:04 AM »
Hi,

I'm afraid that is not supported.

I won't say it is impossible though... You could have a look in your vBuilder folder in program files, and see if you find a "glyphs" folder, Inside is a "gobo" folder.
But be aware! Updating vBuilder will likely override your custom gobo images.

Greetings,
Bootsy
17
Builder & Personality file requests / Re: Propar hex 5 file
« Last post by Julien Levaufre on February 18, 2021, 04:10:02 AM »
Please find your fixture file included,
Enjoy ;)
18
Builder & Personality file requests / Propar hex 5 file
« Last post by rolfnagtzaam on February 18, 2021, 12:37:45 AM »
Hey,

Can someone make the file for Pro par hex 5?

Thanks!
19
Cuelux / Blinder on Akai MPD218
« Last post by ianbar on February 17, 2021, 11:43:25 AM »
Hi,
I am currently using an Akai MPD218 to control my CueLux. I have created my own midi map for this. Everything works correctly, however I can't get my second blinder to work through the Akai. I have 2 sets of blinders, 1 set is controlled through the global blinder group and the other through a playback button. The global blinder group works fine, but other one goes on and stays on, instead of only staying on when pressed down.
Code: [Select]
<action>
                    <trigger type="Midi" specifier="Change">Channel X - Message 9 - Index 36</trigger>
                    <tasks>
                        <task type="Playback Direct Button 07" feature="ButtonSecundair" function ="Control"/>
                    </tasks>
                </action>
This is the code I'm using. I would like to have the blinder on my playback button act like a blinder instead of turning on and staying on after being pressed.
I hope anyone can help me on this topic.
20
Builder & Personality file requests / Re: Eurolite LED-Par64
« Last post by Julien Levaufre on February 17, 2021, 09:06:11 AM »
No problems, we are here to help!  ;D
You can find some more informations in the video tutorials: https://www.youtube.com/watch?v=Hm32TihpCqY&list=PLvPZhmQB8e3Cfc9CGyal5awdDZurvIuq_
Enjoy ;)
Pages: 1 [2] 3 4 ... 10
SMF spam blocked by CleanTalk