Visual Productions forum

Author Topic: lightmaXX - Platinum LED Bar Tri-LED 24x3 Watt  (Read 5562 times)

July 08, 2010, 06:11:18 PM
Read 5562 times

DarkAngel

  • Member
  • *
  • Posts: 4
Hi,

I add the DMX- Tables as picture.I need the file until 15.07.2010.


Thank you.

July 09, 2010, 09:37:06 AM
Reply #1

Maarten Engels

  • Administrator
  • Member
  • *****
  • Posts: 2383
    • www.visualproductions.nl
Please find the personality file attached.
Instructions at http://www.visualproductions.nl/forum/index.php?topic=857.0

[attachment deleted by admin]
Maarten Engels
Visual Productions BV

July 09, 2010, 01:55:05 PM
Reply #2

DarkAngel

  • Member
  • *
  • Posts: 4
Hi,

thank you for the file. I could add the fixture to cuelux, but I can only modify the Dimmer and the Strobe. It is impossible to modify the colors (red, blue, green). I tried the 27 channel mode. The DMX-adresses are correctly configured.

July 09, 2010, 03:37:24 PM
Reply #3

DarkAngel

  • Member
  • *
  • Posts: 4
Hi,
tried all other DMX-modes. The problem is the same.

July 10, 2010, 03:28:02 PM
Reply #4

Maarten Engels

  • Administrator
  • Member
  • *****
  • Posts: 2383
    • www.visualproductions.nl
Please take into account that a RGB fixture in Cuelux also has a virtual dimmer (this might be a bit confusing as the main fixture has a dimmer as well). So if you set the RGB color for a sub the DMX values remain 0 when the sub's dimmer is set to 0%.
Maarten Engels
Visual Productions BV

July 12, 2010, 09:05:27 AM
Reply #5

DarkAngel

  • Member
  • *
  • Posts: 4
Hi,

it works. thank you.

Greeting Florian


July 12, 2010, 10:57:07 PM
Reply #6

amonsch

  • Member
  • *
  • Posts: 20
hi
I also use the lightmaxx color bar and i found there was one feature missing
if you use the macro function there are 2 macros from 220 till 241 which permit you to select the color of the macro
this was not included in the cuelux fixture
i added it by myself and it works fine
 
if you want you can download it here and to take no risk i called it lightmaxx2 so  there is no confusion with the original lightmaxx library
i also added the lightmaxx Mech 5 which is actually the same as the stairville mh575 s

http://files.me.com/amonschauer/xjxtn4

July 13, 2010, 04:36:00 PM
Reply #7

Maarten Engels

  • Administrator
  • Member
  • *****
  • Posts: 2383
    • www.visualproductions.nl
Thank you, I have included the Mech 5 in the library.

The second macro channel in the color bar is tricky; it shares the same channel as RED. So you would need to take this channel down to correctly operate the RGB mode; that's why I didn't include it. But if it works for you, then please use it as you like.

regards,
Maarten
Maarten Engels
Visual Productions BV

July 13, 2010, 09:09:07 PM
Reply #8

amonsch

  • Member
  • *
  • Posts: 20
hi i think this should not be a problem as the rgb mode is only in the subfixture ... or i use only macro and then i have the color change in the macro mode or i use rgb in the subfixture ... this shouldnt interfear in any way

 

SMF spam blocked by CleanTalk