Visual Productions forum

Author Topic: RVE PERFORMER fixture request  (Read 1872 times)

August 31, 2010, 10:36:36 AM
Read 1872 times

bspot

  • Member
  • *
  • Posts: 6
i m looking for the fixture for the RVE performer .
here are all the technical info i could find :

MAIN FEATURES
Patch Curve Controls
Test Chaser Indicators
: In serial, first channel selection on 3 address selectors : Linear : DMX512onXLR5
Last level held in case of signal interruption 0/+10 Vdc voltage on female DIN 8 connector 6 faders + 1 master on the front face Possible control in parallel with DMX, analog control and faders
: All channels, by steps : 9 chasers with speed adjustment, selection by 3 encoding selectors : LED power for power supply and defect signalization
LED DMX for the digital signal reception (DMX 512)
TECHNICAL SPECIFICATIONS
Power rating Power supply
Output protections Triac control Output sockets Operation mode
: 6 x 2.3 kW under 230 Vac : Tri + N + GND, 230/400 Vac, 50/60 Hz
on cable 5 x 2.5 mm2 : Fuse MCB 10 x 38, 10 A : Digital in all control cases : NF double 10/16 A, Schuko, Swiss : Leading edge dimming
EMC compatibility Environment
Protection degree Cooling
: According to the EN 55014/60669 standards
: 0°C to + 40°C 32°F to 104°F
Humidity : Protection degree of enclosure = 30 : By natural convection
: Temperature
: 0 % to 90 %
OPTIONS
• Swiss, Schuko connectors   •   Single pole + neutral MCB • RCCD 30 mA   •   Star-delta power

August 31, 2010, 11:49:45 AM
Reply #1

Maarten Engels

  • Administrator
  • Member
  • *****
  • Posts: 2383
    • www.visualproductions.nl
hi,

It's just a dimmer so you can always use the "Dimmer 06x" from the "Generic" library. Anyway, I also created a RVE file for you  ;) please find it attached; instructions at http://www.visualproductions.nl/forum/index.php?topic=857.0

[attachment deleted by admin]
Maarten Engels
Visual Productions BV

September 01, 2010, 09:21:08 PM
Reply #2

burnbros

  • Member
  • *
  • Posts: 29

 

SMF spam blocked by CleanTalk