Visual Productions forum

Author Topic: American DJ Par 64P Led Pro missing channels  (Read 3285 times)

September 29, 2010, 02:24:05 PM
Read 3285 times

burnbros

  • Member
  • *
  • Posts: 29
Hi again, I have 2 sets of 3 Par 64, one set in 6 channels Mode and the other in 7 channels but only 5 channels works on both (RGB,  dimmer & strobe)

September 29, 2010, 02:46:40 PM
Reply #1

Bart van Wunnik

  • Member
  • *
  • Posts: 221
    • CompYouServ
Hi burnbros,

It should be fixed in the fxt file attached.

[attachment deleted by admin]
Bart van Wunnik


September 29, 2010, 03:40:09 PM
Reply #2

burnbros

  • Member
  • *
  • Posts: 29
Hi again! Controls do not match, and I guess there should be one control more on 7 channels mode but I have the same numbers of faders on both 6 an 7 channel modes! I'll send you back the link:
http://www.americandj.com/ProductDetails.aspx?Category=&ItemNumber=1653

September 29, 2010, 03:52:11 PM
Reply #3

Bart van Wunnik

  • Member
  • *
  • Posts: 221
    • CompYouServ
Can you be more specific, I have created the fixture the same as it says in the manual that you provided.
The only that is different between the 7 and the 6 channel, is the fact that the 7 channel has a dedicated dimmer channel.

Also note that there is now a macro and a custom channel within the fixture, it was not there before.
It might be that you are looking for those features of the fixture?
Bart van Wunnik


September 29, 2010, 04:08:33 PM
Reply #4

burnbros

  • Member
  • *
  • Posts: 29
I'll try again later! I will keep you informed!


February 17, 2015, 01:43:27 AM
Reply #5

SpaceyDeeJ

  • Member
  • *
  • Posts: 11
    • http://www.spacecompany.nl
For somehow i dont get this fixture to work withing CueLOuxpro in the 7channel mode

When selecting the dimmer, the unit will turn to red which is the first dmx channel, will turn on, though when selecting another color from the color mix, the other colors wont be set... the strobe function and macro function do work..

When I compair the xml doc, and compair that with the dmx channel list, it looks like it should be ok... any idea what this could be ?

additional info, when i configure a generic dimmer of 7 channels and controll the ledpar, everything works fine...
« Last Edit: February 17, 2015, 01:45:19 AM by SpaceyDeeJ »

February 17, 2015, 08:19:15 AM
Reply #6

Julien Levaufre

  • Global Moderator
  • Member
  • *****
  • Posts: 2366
    • www.visualproductions.nl
i tried to fix the fixture file, please test it and tell me if it's better
Julien Levaufre
Visual Productions BV

February 17, 2015, 03:29:58 PM
Reply #7

SpaceyDeeJ

  • Member
  • *
  • Posts: 11
    • http://www.spacecompany.nl
3ch. and 6 ch. do work... 7 ch. version unfortunally does not...
« Last Edit: February 17, 2015, 04:15:09 PM by SpaceyDeeJ »

February 18, 2015, 08:20:03 AM
Reply #8

Julien Levaufre

  • Global Moderator
  • Member
  • *****
  • Posts: 2366
    • www.visualproductions.nl
i am sorry but i really can't see from where the problem is coming...
When i check with the dmx monitor in cuelux each chanel seems to work as it should.
Julien Levaufre
Visual Productions BV

February 19, 2015, 05:11:32 PM
Reply #9

SpaceyDeeJ

  • Member
  • *
  • Posts: 11
    • http://www.spacecompany.nl
Me neither, only for the fact that it doesnt seem to be working  ;D ;D

February 24, 2015, 07:56:37 PM
Reply #10

SpaceyDeeJ

  • Member
  • *
  • Posts: 11
    • http://www.spacecompany.nl
It works now ! See other topic ...

February 25, 2015, 08:40:20 AM
Reply #11

Julien Levaufre

  • Global Moderator
  • Member
  • *****
  • Posts: 2366
    • www.visualproductions.nl
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk