Visual Productions forum

Author Topic: Cuelux Cable DMX Output Speed  (Read 2125 times)

May 01, 2014, 09:12:10 AM
Read 2125 times

Psl71

  • Member
  • *
  • Posts: 1
Good morning,

is it possible to set the dmx output speed to a slower level?
I have 4 Involight MH255S Movingheads, and the Dimmerchannel let the MH Strobe, but the Channel is at 100% which is open for the Shutter.
Channels are set correctly at the Builder.
The Same procedure comes with the Daslight Software Interface, but there is an option to set DMX to slow.
The Movingheads then work correctly.

Thanks for an Answer.

Greetings, Jan Geiter

(Sorry for the bad english, I am from Germany ;))

May 03, 2014, 10:57:26 AM
Reply #1

Maarten Engels

  • Administrator
  • Member
  • *****
  • Posts: 2383
    • www.visualproductions.nl
hi Jan,

Unfortunately you can not change the speed of the DMX output.
Please contact Involight to see if they have a fix available. The DMX speed of the Cuelux cable is well within the DMX specification.

good luck,
Maarten
Maarten Engels
Visual Productions BV

 

SMF spam blocked by CleanTalk