Visual Productions forum

Author Topic: Fade In / Fade Out  (Read 2003 times)

June 22, 2012, 01:57:02 PM
Read 2003 times

mheidler

  • Member
  • *
  • Posts: 3
First:
I programmed 2 cues, triggered on the GO-buton.
the Fade-In and Fade-Out time is different (3sec fade in and 8 sec fade out).
If i trigger the second cue, the first should fade out in 3 sec and cue 2 should fade in  in 8 sec, but both (fade in and out) needs 8 sec.
It is not possible to have two different fade-times at the moment, the longer time will be used for both directions (in and out).

Second:
What is the "Backround" Check-Field at the Cue-Setup fore?

I use cuelux 1.3.33 at a Mac-Book.

Thank for your help and sorry for my terrible english...

Michael

June 22, 2012, 02:53:25 PM
Reply #1

Maarten Engels

  • Administrator
  • Member
  • *****
  • Posts: 2383
    • www.visualproductions.nl
Answer to the first:
If you go to the next cue the value of an attribute will change. When the attribute goes to a higher value the 'fade in' time is used. When the attribute goes to a lower value the 'fade out' time is used.

For some attributes you cannot speak about 'higher' or 'lower' values like pan/tilt-position. In those cases the ''fade in' time is always used.
Maarten Engels
Visual Productions BV

June 22, 2012, 03:39:30 PM
Reply #2

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
for the secondpoint i can help you,
When you check the background option for a cuelist, this means that this cuelist will always stay on even if you cut down the global fader to off. It's very usefull for audience light for example.
Julien Levaufre
Visual Productions BV

June 23, 2012, 12:10:40 PM
Reply #3

mheidler

  • Member
  • *
  • Posts: 3
Thanks for your answers,

it works at generic dimmers, but not with the "American DJ Mega Par Profile" RGB-Spot.

Michael

 

SMF spam blocked by CleanTalk