Visual Productions forum

Author Topic: v1.3.41 Beta  (Read 7814 times)

July 24, 2013, 04:32:20 PM
Read 7814 times

Dennis Kromhout

  • Member
  • *
  • Posts: 838
Version 1.3.41 is available from ftp://haarlem.visualproductions.nl/releases

Please note that this is a beta release.
Code: [Select]
/****************************************************************************************
 * RELEASE 1.3.41 - Public Beta
 ****************************************************************************************/
Release Date  : 2013 July 24
New Features  : - Added GPI refresh task
                - Added saturation parameter for Video & Camera matrix pattern
                - Added Dashboard Palette Grid task
                - Improved GPI response for devices not assigned to an universe.
Solved Bugs   : - Changed version number to be compatible with normal Cuelux installation
                - Fixed issue that could result in corrupt backup of console & recorder
                - Fixed issue of the stuck buttons in the interface
                - Fx generator did continue and Tempo tab didn't work when break was on.
                - DateAndTime scheduling dialog now also allows to change the date value.
                - DateAndTime scheduling value was not loaded correctly from showfile.

CueCore v1.56b: - Changed DMX Start Offset to Address
                - Added option to set Memories to 1 or 2
                - Refresh feature for Variable task had parameters.
                - Fixed "Duplicate A on B"
                - On startup the CueCore will sample the GPI to initialize. In older
                  versions an action could be triggered if a GPI was already high before
                  start-up
                - DateAndTime trigger now uses current date instead of default 2007
                - Renamed "Slave Mode" to "ReleasedByMaster"
                - Renamed "Network link" to "Network Connection"
                - Removed User List task
                - Added Send Float for UDP
                - Changed Send Unsigned parameter to character count instead of byte
                  count for UDP task

IoCore v1.18b : - Added "Touch Screen -> GPO" template
                - Renamed "Slave Mode" to "ReleasedByMaster"
                - Renamed "Network link" to "Network Connection"
                - Removed User List task
                - Added send float for RS-232 & UDP
                - Changed Send Unsigned parameter to character count instead of byte
                  count for RS-232 & UDP task

B-Station v0.40b:
                - Added RGBWIS, SRGB, IS, S & Ss personalities
                - Cuelist loop by default now
Solved Bugs   : - Fixed UDP communication
                - Fixed Learn button
                - Renamed button trigger "Channel" to "Button"
                - Renamed cuelist cue change trigger "Channel" to "Cue"

B-Station v0.41b:
                - Changed Fade behaviour, it will now fade to the set intensity. In older
                  versions it would set the intensity and fade to black

B-Station v0.42b:
                - Required for CueluxPro

         NOTE : Always make a backup of your configuration before performing a firmware
                upgrade.

/****************************************************************************************
 * RELEASE 1.3.13 - Private Beta
 ****************************************************************************************/
Release Date  : 2013 July 5
New Features  : - Added support for video playback in matrix (Windows)
Solved Bugs   : - Action containing a percentage value were loaded incorrectly causing a
                  crash.

/****************************************************************************************
 * RELEASE 1.3.12 - Private Beta
 ****************************************************************************************/
Release Date  : 2013 June 28
New Features  : - Added support for video playback in matrix (Linux only)
                - 64 Bit editions of Ubuntu are now supported (v13.04 and higher)
                - Dump dialog offers selection of sample rates.
Solved Bugs   : - Action source midi could only trigger on Midi channel 0
                - Playback intensity wasn't loaded from showfile correctly in v1.3.11
                - The 'assignment' dialog did not allow to clear the assignment of a
                  playback.

/****************************************************************************************
 * RELEASE 1.3.11 - Private Beta
 ****************************************************************************************/
Release Date  : 2013 June 3
New Features  : -
Solved Bugs   : - Matrix layer did control DMX channel 5 to 9
                - Combination of DMX action source & Playback Fader didn't work
                - State trigger was broken in previous beta.

CueCore v1.55b  * This firmware can only be installed on CueCore's running firmware v1.46
                  or higher. If you're using an older firmware please upgrade to v1.46
                  first. After upgrading to v1.55b perform a return to factory defaults.
New Features  : - Added DMX start address setting for Show Control.
                - Added Control functions for UDP

IoCore v1.17b   * This firmware can only be installed on IoCore's running firmware v1.11
                  or higher. If you're using an older firmware please upgrade to v1.11
                  first. After upgrading to v1.17b perform a return to factory defaults.
New Features  : - Added field to show IP of master when connected to CueluxPro.
                - Added Control functions for UDP
                - Added Send Unsigned feature for RS-232

Again, we appreciate your feedback!

NOTE:
When you're unable to select a CueCore as output (IP address stays yellow).
Then check your network configuration and make sure your DNS server is set.
If you don't have a DNS server then set it to your own IP
« Last Edit: July 30, 2013, 12:47:24 PM by Dennis Kromhout »
Dennis Kromhout

July 24, 2013, 07:30:27 PM
Reply #1

AxelF

  • Member
  • *
  • Posts: 152
> New Features  : - Added support for video playback in matrix (Windows)
How can that be used ? Where is the control ?

Unfortunately I don't understand most of the matrix function....

July 25, 2013, 09:19:46 AM
Reply #2

Dennis Kromhout

  • Member
  • *
  • Posts: 838
The Mac version is now also on the FTP

How can that be used ? Where is the control ?

When using the 3x 4 buttons on the top. Press Matrix -> Layout.
Here you add your fixtures to the (full) matrix
After adding your fixtures press "Layer"
Each layer can be the full matrix or a small part, it will show up in Cuelux as a virtual fixture

Press the "Pattern" button
Here you can configure your pages and patterns
When you add a Movie you can set the Path to the video file

To start playing the movie you go back to the status view and select the layer.
In the programmer set:
Beam -> Dimm (intensity of layer) to 100%
Colour Mix -> White
Gobo -> Set page (gobowheel 1) & pattern (gobowheel 2)
Custom -> Spee(d)

So there are no new controls, it works just as any other fixture in your patch
Dennis Kromhout

July 25, 2013, 09:34:06 AM
Reply #3

AxelF

  • Member
  • *
  • Posts: 152
Thanks Dennis.

I have not noticed, that this pattern can be edited, which is not possible at the other pattern.

July 25, 2013, 10:40:30 AM
Reply #4

Dennis Kromhout

  • Member
  • *
  • Posts: 838
Text, Confetti, Image & Video capture also have extra settings.
Dennis Kromhout

July 25, 2013, 10:44:26 AM
Reply #5

AxelF

  • Member
  • *
  • Posts: 152
I can select these patterns, if I select the layer in the status display and modify it at the programmer.

If I want to save this as a cue, not all settings are stored. So the cue doesn't work. Unfortunately I cannot say which options are not stored. It seems to be not always the same.

July 25, 2013, 09:28:34 PM
Reply #6

jgastineau

  • Member
  • *
  • Posts: 14
I get an immediate app crash when I select the Lauchpad Midi Map.

July 28, 2013, 02:15:07 AM
Reply #7

bourby

  • Member
  • *
  • Posts: 212
Used this version last night in a live environment. Terrible experience.

Loaded an old show, just all seemed buggy. I couldn't record anything to any subs. I removed all fixtures and created them all from scratch. The first fixture was a Generic Dimmer in the patch window, but in the main status window, there was an LED PANEL. Which wasn't in the patch page?

During the show, 4 crashes. 1 While just flashing subs, 3 while editing a chase live.

This was on windows.

I'm also using a touchscreen, is there no onscreen keyboard usable in this in touchscreen?

This needs to be more solid.

July 28, 2013, 02:39:34 AM
Reply #8

bourby

  • Member
  • *
  • Posts: 212
Also just had a play on my Mac.

In here, if I "Save Ave" I can't type a show name. Clicking on the filename box doesn't allow me to type in there.

Big Problem

July 29, 2013, 03:39:00 PM
Reply #9

bourby

  • Member
  • *
  • Posts: 212

July 29, 2013, 03:49:30 PM
Reply #10

Maarten Engels

  • Administrator
  • Member
  • *****
  • Posts: 2383
    • www.visualproductions.nl
In here, if I "Save Ave" I can't type a show name. Clicking on the filename box doesn't allow me to type in there.
I just tried to reproduce this issue both on Mac and Ubuntu, but this just works at my end. I click on the 'Save as' button and start typing away on my keyboard.

I'm also using a touchscreen, is there no onscreen keyboard usable in this in touchscreen?
We still need to enable this in CueluxPro.
Maarten Engels
Visual Productions BV

July 29, 2013, 03:51:59 PM
Reply #11

bourby

  • Member
  • *
  • Posts: 212
And the crashes?

July 30, 2013, 08:53:17 AM
Reply #12

Maarten Engels

  • Administrator
  • Member
  • *****
  • Posts: 2383
    • www.visualproductions.nl
During the show, 4 crashes. 1 While just flashing subs, 3 while editing a chase live.
Can you tell us which steps you took that resulted in the crashes? That would help us to reproduce the issue.
Maarten Engels
Visual Productions BV

July 30, 2013, 08:55:44 AM
Reply #13

bourby

  • Member
  • *
  • Posts: 212
Once was just recording a cue to a sub and the others were editing chases.

Does Cuelux have a crash log I can send you?

July 30, 2013, 10:49:46 AM
Reply #14

Dennis Kromhout

  • Member
  • *
  • Posts: 838
On Mac a crash report will be generated, on the other systems not.
Dennis Kromhout

 

SMF spam blocked by CleanTalk