July 18, 2013, 12:21:25 PM
Read 2125 times
Please note that these are beta releases, users not needing the new features (including CueluxPro) are recommended to keep using CueCore v1.46 & IoCore v1.11
/****************************************************************************************
* RELEASE 1.3.13 Beta
****************************************************************************************/
Release Date : 2013 July 18
vManager changes : * Required for B-Station v0.40b and higher
- Fixed issue that could result in corrupt backup of console & recorder
CueCore v1.56b : - Changed DMX Start Offset to Address
- Added option to set Memories to 1 or 2
- Refresh feature for Variable task had parameters.
- Fixed "Duplicate A on B"
- On startup the CueCore will sample the GPI to initialize.
in older versions an action could be triggered if a GPI was already
high before start-up
- DateAndTime trigger now uses current date instead of default 2007
- Renamed "Slave Mode" to "ReleasedByMaster"
- Renamed "Network link" to "Network Connection"
- Removed User List task
- Added Send Float for UDP
- Changed Send Unsigned parameter to character count instead of byte
count for UDP task
IoCore v1.18b : - Added "Touch Screen -> GPO" template
- Renamed "Slave Mode" to "ReleasedByMaster"
- Renamed "Network link" to "Network Connection"
- Removed User List task
- Added send float for RS-232 & UDP
- Changed Send Unsigned parameter to character count instead of byte
count for RS-232 & UDP task
B-Station v0.40b : - Added RGBWIS, SRGB, IS, S & Ss personalities
- Cuelist loop by default now
Solved Bugs : - Fixed UDP communication
- Fixed Learn button
- Renamed button trigger "Channel" to "Button"
- Renamed cuelist cue change trigger "Channel" to "Cue"
B-Station v0.41b : - Changed Fade behaviour, it will now fade to the set intensity.
In older versions it would set the intensity and fade to black
NOTE : Always make a backup of your configuration before performing a firmware
upgrade.
/****************************************************************************************
* RELEASE 1.3.11 Beta
****************************************************************************************/
Release Date : 2013 May 31
vManager changes :
CueCore v1.55b * This firmware can only be installed on CueCore's running firmware
v1.46 or higher. If you're using an older firmware please upgrade
to v1.46 first. After upgrading to v1.55b perform a return to factory
defaults.
New Features : - Added DMX start address setting for Show Control.
- Added Control functions for UDP
IoCore v1.17b * This firmware can only be installed on IoCore's running firmware
v1.11 or higher. If you're using an older firmware please upgrade
to v1.11 first. After upgrading to v1.17b perform a return to factory
defaults.
New Features : - Added field to show IP of master when connected to CueluxPro.
- Added Control functions for UDP
- Added Send Unsigned feature for RS-232
vManager is available on the
main download page.
« Last Edit: July 19, 2013, 09:03:11 AM by Maarten Engels »
Logged
Dennis Kromhout