Visual Productions forum

Author Topic: Request for Profile for "Antari M-10 Stage Fogger"  (Read 2662 times)

August 08, 2013, 12:15:37 PM
Read 2662 times

Mads

  • Member
  • *
  • Posts: 29
    • Diskotek NoN
hey, i woul like to request a profile for the Antari M-10 Stage Fogger, is that possible?

Best regards
Mads Krog Jensen

Pro Sound & Light
7400 Herning, Denmark
_____________________________________
Best Regards

Mads Krog Jensen
www.diskoteknon.com

August 08, 2013, 12:47:18 PM
Reply #1

Dennis Kromhout

  • Member
  • *
  • Posts: 838
Hello,

Here is the requested file, for instructions to update the library please read this
Dennis Kromhout

September 09, 2013, 09:42:05 PM
Reply #2

Mads

  • Member
  • *
  • Posts: 29
    • Diskotek NoN
Hey, the macro createt for continuous output is not set to the right amount, when done by the original remote, loads of smoke pours out, but seems to be alot less thru visual DMX, can you verify this ?
_____________________________________
Best Regards

Mads Krog Jensen
www.diskoteknon.com

September 10, 2013, 09:42:02 AM
Reply #3

Dennis Kromhout

  • Member
  • *
  • Posts: 838
The personality file is for Cuelux/CueluxPro, not VisualDMX.

The values seem to match those specified in the M-10 manual.
Dennis Kromhout

September 13, 2013, 09:15:03 PM
Reply #4

Mads

  • Member
  • *
  • Posts: 29
    • Diskotek NoN
Strange, i'll have to check up on my fogger then, might be something eles playing a role.
_____________________________________
Best Regards

Mads Krog Jensen
www.diskoteknon.com

September 17, 2013, 07:36:50 PM
Reply #5

Mads

  • Member
  • *
  • Posts: 29
    • Diskotek NoN
@ Dennis Kromhout

-  Just checked again, nothing wrong with the fogger, i have a vid, that shows the problem, can i mail it to you, so you can check it out ?
_____________________________________
Best Regards

Mads Krog Jensen
www.diskoteknon.com

September 18, 2013, 09:42:46 AM
Reply #6

Dennis Kromhout

  • Member
  • *
  • Posts: 838
I believe you but to make the personality I will need to know what DMX values to set.
And it seems to match the values found in the manual, do you have a different one?
You can verify this using the Builder utility or by opening the .XML file in any text editor

Code: [Select]
<part attribute="Fog">
    <range function="Control MSB" offset="0">5,255</range>
</part>
<part attribute="Macro">
    <range function="On" offset="1">251,255</range>
</part>

/Edit:
One thing you could also try is by patching a "Dimmer 02x" from the generic library. That way you have 2 faders to experiment and find out was value is actually needed to put it in Non stop burst mode. As we don have access to this machine.
« Last Edit: September 18, 2013, 09:55:33 AM by Dennis Kromhout »
Dennis Kromhout

 

SMF spam blocked by CleanTalk