Visual Productions forum

Author Topic: B-station (small) bug with the double Intensity Personality (II)  (Read 2235 times)

April 03, 2014, 08:23:51 PM
Read 2235 times

TAHS

  • Member
  • *
  • Posts: 82
Hello Visual Productions,

During programming the B-station, I found a small bug in the II (double Intensity) Personality !
When I activate a other cue, one of the channels starts flashing during the crossfade time !

For now I've change this Personality with a AW Personality and this looks fine during the crossfade.

If needed, I will sent my B-station configuration file by email.

A other question about a new Personality for our RGB pars...
Code: [Select]
DMX MODE 5
 
Chanel Value Function
1 0-255 RED: 0 = OFF, 1-255 = DIMMER 1-100% OUTPUT
2 0-255 GREEN: 0 = OFF, 1-255 = DIMMER 1-100% OUTPUT
3 0-255 BLUE: 0 = OFF, 1-255 = DIMMER 1-100% OUTPUT
4 0-255 STROBE: 0-15 = OFF, 16-255 = 1Hz – 12Hz
5 0-255 MASTER: 0 = OFF, 1-255 = DIMMER 1-100% OUTPUT

For our RGB pars I need a Personality like this: RGBSI (and not RGBIS)

Thanks and I hope to hear soon from you guy's...
With Best Regards,
Marten

April 04, 2014, 09:49:26 AM
Reply #1

Dennis Kromhout

  • Member
  • *
  • Posts: 838
Hello,

Actually its Ii instead of II meaning the second channel is Intensity Fine/LSB (16 bit)
There is no "double intensity" personality, its 1 single attribute.

RGBSI will be added in next version.
Dennis Kromhout

 

SMF spam blocked by CleanTalk