Visual Productions forum

Author Topic: Stariville MH-100  (Read 2674 times)

May 06, 2014, 07:08:23 PM
Read 2674 times

LEO

  • Member
  • *
  • Posts: 8
Hello Everybody!

Can anyone make a patchfile for the Stairville MH-100 Beam 36x3W ?

Manual available here:

http://images6.thomann.de/pics/atg/atgdata/document/manual/c_325876_en_online.pdf

Need for Cuelux

Thanks a lot!
« Last Edit: May 06, 2014, 07:10:53 PM by LEO »

May 07, 2014, 10:02:48 AM
Reply #1

Julien Levaufre

  • Global Moderator
  • Member
  • *****
  • Posts: 2629
    • www.visualproductions.nl
Hello,

Here is the requested file, for instructions please read this
Julien Levaufre
Visual Productions BV

May 12, 2014, 07:59:58 PM
Reply #2

LEO

  • Member
  • *
  • Posts: 8
Hey

i have a little problem with the 14 channel mode.

all things working great TILL i do something with the channel 12.
once channel 12 was activated it´s not possible make colors with something else than channel 12

from value 0-14 the LEDs are not black out - they are shining red.

is this an software/fixture bug or an manufactoring bug?

kind regards

May 14, 2014, 03:00:08 PM
Reply #3

djmsb

  • Member
  • *
  • Posts: 23
It is an Bug in the Fixure.

Chanel 12 had a range 16-255 it must be under 16.

Change the Range under 16 into the Builder and the MH-100 runs perfekt.

May 16, 2014, 07:07:36 AM
Reply #4

LEO

  • Member
  • *
  • Posts: 8
Thx a lot!  :)

 

SMF spam blocked by CleanTalk