Visual Productions forum

Author Topic: Request: Futurelight Color Wave LED Moving bar  (Read 2176 times)

December 26, 2014, 11:37:03 AM
Read 2176 times

Rebby

  • Member
  • *
  • Posts: 10
Futurelight Color Wave LED moving bar

https://www.huss-licht-ton.de/pdf/FUT51839005.pdf

Software: Cuelux

Dead line: asap would be very nice!

Greetings!

January 02, 2015, 04:15:41 PM
Reply #1

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3182
    • www.visualproductions.nl
sorry for the delay but here is your fixture file...
It was not an easy one.
I have made 2 fixture ( 1 and 2) for each side of the bar, you have each time to patch the 2 fixture (1 & 2) at the same dmx address.
Enjoy ;)
Julien Levaufre
Visual Productions BV

January 04, 2015, 01:15:13 PM
Reply #2

Rebby

  • Member
  • *
  • Posts: 10
Hello!

I really appreciate your work, because that is really not an easy fixture.

But there are some problems:
1. No Light, even when dimmer is full "on" and a colour is selected. Fixture stays blackout.
2. the Basic Position of the 2 separate sides of the bar is different. In "basic position" the one side is straight up and the other is down. I suppose that is why also shapes do not seem to work properly.

Can you help me with that? Thank you and happy new year!!

Rebby

January 05, 2015, 10:19:10 AM
Reply #3

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3182
    • www.visualproductions.nl
can you tell me witch mode you use?
I have made some test but not found any trouble.
Four the light on problem, you need to set the value of col fun. in the "other" tab between 25 and 44% to enable the color fix selection.
Maybe this is what you missed.
For the position, the default dmx value are ok, i do not understand why the position is different. Did you set exatly the same address to fixture 1 and 2?
Julien Levaufre
Visual Productions BV

January 05, 2015, 10:07:24 PM
Reply #4

Rebby

  • Member
  • *
  • Posts: 10
That was my fault. But I admit, that it was too hard for me to find out the "col fun" value. ;-)

It was a very good idea to combine two fixtures on the same DMX value.
... Not I tried the extended DMX mode and it worked out fine with light on and position.

It seems to be hard to find out the relation between the "col fun" value and the other two sliders on the same side that are really hard to read. The amount of surprise arises when combining it with changing the "stl" slider and the "scal" slider at "beam" and "color fix". Many interesting things happen! ;-) Can you tell me, wich DMX Channels the functions refer to, so that I can try to combine them by using the manual?

January 06, 2015, 09:06:25 AM
Reply #5

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3182
    • www.visualproductions.nl
great  ;D
The first fader is the pan and tilt functions
second one is  SHutter/Strobe functions
Third fader is Colors functions.

I hoppe you will be able to do what you expect with your fixture.
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk