Visual Productions forum

Author Topic: Some Fixture CH question  (Read 1006 times)

May 03, 2015, 04:55:41 PM
Read 1006 times

litinyiu

  • Member
  • *
  • Posts: 3
LED PAR RGBW 8CH
Ch1  "Dimmer"  0-255
Ch2  "Red"  0-255
Ch3  "Green"  0-255
Ch4  "Blue"  0-255
Ch5  "White"  0-255
Ch6  "Strobe"  0-255 
Ch7  "NONE"  0-50
       "Colour Change 1(Sharp)"  51-100
       "Colour Change 2(Cross Fade)"  101-150
       "Colour Change 3(Fade On&Off)"  151-200
       "Music Mode"  201-255
Ch8 "Speed of Ch7"  0-255

How can I set Ch7??
Using Custom is the only way?
And sometimes I clear all changes, the light still on the "Colour Change", how can I fix it?

Additional suggestion, may Cuelux all some built-in colour pattern or colour chase?
May be just "Colour Mix" to record some default colour pattern or colour chase for the User
The idea is come from "Jands Australia Stage CL"
http://jands.com/downloads/stagecl/StageCL_1-3_User_Guide.pdf
P.34-37

Please help
thank you

May 04, 2015, 09:41:38 AM
Reply #1

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3229
    • www.visualproductions.nl
for chanel 7 you should use the macro parameter, except for the musical mode witch get it own option.
Then create a "custom" for speed.

For your color change problem check on the dmx monitor is once you cleared the programmer and stopped all cuelist( clicking and holding the clear boutton for 3 seconds) what is the chanel 7 value. If your fixture file is done the right way it should be between 0 and 50 ... if not the problem comes from your fixture file, if it's and your fixture is till in macro mode it comes from your fixture.
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk