Visual Productions forum

Author Topic: iocore block inputs  (Read 1279 times)

January 21, 2016, 05:50:50 PM
Read 1279 times

tomek13w

  • Member
  • *
  • Posts: 25
I want that one input block others inputs. After that i need to switch back all inputs again using single dmx chanel.
Is it possible?
I can use outputs to cut off wires of others inputs, but is it any nicer wat to do this?

January 21, 2016, 06:14:02 PM
Reply #1

Boyd Nijsten

  • Member
  • *
  • Posts: 202
    • www,guusvandenakker.nl
enable and disable the GPI actionlist using another GPI and DMX actionlist.

January 26, 2016, 08:44:49 PM
Reply #2

Joep van Iersel

  • Member
  • *
  • Posts: 5
It is indeed possible to disable en enable the GPI actionlist via a DMX actionlist.

Enabeling the GPI actionlist via a second GPI actionlist is not possible because only one actionlist per type is allowed. A possible solution to this is to put the actions from the GPI actionlist which you want to enable and disable in a "Userlist" actionlist and enable and disable this actionlist via a GPI task.

 

SMF spam blocked by CleanTalk