Visual Productions forum

Author Topic: Stairville LED Bar 126 fixture for Cuety LPU-1 needed  (Read 2870 times)

April 23, 2016, 09:40:44 PM
Read 2870 times

Tjumseninumsen

  • Member
  • *
  • Posts: 9
http://images.thomann.de/pics/prod/255346_manual_en.pdf

tryed the fixture for the LED Bar 256, it didn't work, also it was only a 5 channel fixture, both the 126 and the 256 run 11ch DMX

also, how do i add the fixture to my Cuety LPU-1, i can't find any guide online or in the forum

Thanks

/Thomas

April 29, 2016, 09:23:47 PM
Reply #1

Tjumseninumsen

  • Member
  • *
  • Posts: 9
Still missing my fixture and answer to my question

May 04, 2016, 09:09:22 AM
Reply #2

Michael Chiou

  • Visual Productions
  • Member
  • **
  • Posts: 350
Hello @Tjumseninumsen

You can find the personality file in the attachment. I am not sure if this will work, so your feedback will be much appreciated. :)

Michael.
Michael Chiou
Visual Productions BV

May 04, 2016, 06:02:22 PM
Reply #3

Tjumseninumsen

  • Member
  • *
  • Posts: 9
Thanks, now how do i apply this to my Cuety? i have no clue and can't find much about it

May 06, 2016, 08:44:13 AM
Reply #4

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
to add the new ficture file to your cuety you need to follow these instructions:
http://www.visualproductions.nl/forum/index.php?topic=3850.0
Julien Levaufre
Visual Productions BV

May 06, 2016, 04:29:25 PM
Reply #5

Tjumseninumsen

  • Member
  • *
  • Posts: 9
- copy the file “user.personality” to your Cuety App by using iTunes

..... how??? it seems like obvious steps to other than me is jumped thru, cause i see no way? i bit more exact explenation is needed!

May 06, 2016, 04:48:30 PM
Reply #6

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
Julien Levaufre
Visual Productions BV

May 08, 2016, 10:11:22 PM
Reply #7

Tjumseninumsen

  • Member
  • *
  • Posts: 9
i tryed adding the personality file just as showed in the video, the new fixture should be found in stairville->Led Bar 126 correct? cause it is not there, i've tryed several times and i shut down the app after adding the personality file, even tried rebooting the ipad and still no fixture?

May 09, 2016, 08:14:08 AM
Reply #8

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
you should find a "[user]stairville" entry on the top of the list.
 
Julien Levaufre
Visual Productions BV

May 09, 2016, 04:45:56 PM
Reply #9

Tjumseninumsen

  • Member
  • *
  • Posts: 9
i see the [Stairville] but there is no fixture named LED bar 126?

May 10, 2016, 11:16:30 AM
Reply #10

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
ok, so i finnaly found the problem, as i'am not the one who made the first file for you, i did not noticed this before!
the fixture you are requesting use subfixtures and cuety do not manage subfixtures, so this is why you weren't able to see the fixture you requested in cuety.
Now to let you use your fixture anyway, i created a special cuety patch.
SO you first ned to patch the special cuety 11ch mode, and then patch 3 generic rgb par. This way you will be able to control your complete fixture.
But remember that to acces the 3 pixels of the bar you need to set the main dimmer between 41 and 80.
I hoppe this time it will be ok,
Julien Levaufre
Visual Productions BV

May 10, 2016, 06:43:09 PM
Reply #11

Tjumseninumsen

  • Member
  • *
  • Posts: 9
okay, i see the personality patch now called "Stairville -> LED BAR 126 -> 11ch Cuety", so far so good :D after patching that fixture i should patch 3x "Generic -> RGB PAR", right? i see no fixture in the personality library with that name?
Either this is really challenging or i am very dense :D i am certainly no dmx og cuety expert, but i'm trying!

May 11, 2016, 05:01:46 PM
Reply #12

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
the big thing is that you want to use subfixtures with a software that does not manage subfixtures! But we always find solutions! ;D
For the generic par, just go in the"generic" manufacturer and then patch 3x RGB01x.
This time everything should be ok! ;)
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk