Visual Productions forum

Author Topic: Clear individual Parameter in Programer  (Read 2460 times)

July 19, 2016, 02:49:26 PM
Read 2460 times

djmsb

  • Member
  • *
  • Posts: 23
Hello,

how can i clear individual Parameter in the Programer.

I want to program some positions for Movingheads whitout other parameter only Position. But i need for the position a Beam also i put the Lamp and Shutter on, set the position and want to clear the Lamp and Shutter settings befor i record the Cue.

But the CLEAR Button delete all Settings.

How can i do that?

July 19, 2016, 04:16:32 PM
Reply #1

Michael Chiou

  • Visual Productions
  • Member
  • **
  • Posts: 350
Hello @djmsb

There is no "Clear" button for each parameter on Cuety but you can take the individual fader down to zero. For Pan/Tilt you can press the home button which will bring it back to centre.

With kind regards,

Michael
Michael Chiou
Visual Productions BV

July 20, 2016, 09:48:37 AM
Reply #2

djmsb

  • Member
  • *
  • Posts: 23
Hello Michael,

thanks for your answere. But wenn i Take the Dimmer after the setting down this Parameter ist red and it is saved in the Cue.

When is starting this Cue it set Dimmer at 0%.

I want program only positions, and on a other Cue the Dimmer settings.

July 20, 2016, 03:44:03 PM
Reply #3

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3182
    • www.visualproductions.nl
As cuety works in HTP ( highest takes priority) mode, even if you record a 0 dimmer value in your position cue, when playing this cue together with your dimmer cue, the highest value from the 2 cues ( so the one from your dimmer cue as the other one is 0) will be played.  ;)
Julien Levaufre
Visual Productions BV

July 20, 2016, 11:40:29 PM
Reply #4

denny

  • Member
  • *
  • Posts: 5
Quote
As cuety works in HTP

Are you shure? Which sense does it makes to operate fixtures in htp mode (except dimmer and colour intensity channels)?



July 22, 2016, 09:22:52 AM
Reply #5

Michael Chiou

  • Visual Productions
  • Member
  • **
  • Posts: 350
Hello @denny,

I am sorry for the belated answer. Currently most of the attributes of Cuety are set to HTP with the exception of Pan/Tilt. We are going to  change more attributes to LTP in the next release. Below I am listing the current setting for each attribute.

Red : HTP
Green : HTP
Blue : HTP
Amber : HTP
White : HTP
Intensity : HTP
Shutter : HTP
Colour Fix : HTP
Gobo : HTP
Rotation : HTP
Prism : HTP
Iris : HTP
Focus : HTP
Zoom : HTP
Frost : HTP

Pan : LTP
Tilt : LTP

Best regards,

Michael
Michael Chiou
Visual Productions BV

July 23, 2016, 01:31:31 PM
Reply #6

denny

  • Member
  • *
  • Posts: 5
Hello @denny,

I am sorry for the belated answer. Currently most of the attributes of Cuety are set to HTP with the exception of Pan/Tilt. We are going to  change more attributes to LTP in the next release. Below I am listing the current setting for each attribute.

Best regards,

Michael

So good to see that you working on it! Keep it up

best regards, Denny

 

SMF spam blocked by CleanTalk