Visual Productions forum

Author Topic: programming and dumping  (Read 1034 times)

December 14, 2016, 03:18:14 PM
Read 1034 times

tizianos

  • Member
  • *
  • Posts: 30
hi all,
im trying to set a standalone configuration, I want to program some iocore with cuecore inside cuelux pro, but after all I want to dump all the cue, actionlist, inside my device. is it possible? what is your suggestion?
thanks

December 15, 2016, 01:42:09 PM
Reply #1

JurriŽn de Klerk

  • Visual Productions
  • Member
  • **
  • Posts: 94
Hello tizianos,

Only Cue's and Cuelists can be dumped from CueluxPro to a CueCore, the communication part is something you have to setup using the web-interface of the units (http://www.visualproductions.nl/forum/index.php?topic=5112.0  ;) ).
The manual of CueluxPro describes how to dump either a cue or a cuelist into the CueCore (see CueluxPro manual page 27).
Just to help you getting started; you need to patch the universes you are using in CueluxPro to the CueCore. To do this, navigate to Patch tab and then the Universe tab. In this tab make sure that the outlet field of your universe are showing the IP address of the unit in white. The unit will then be 'mastered' by your CueluxPro software.
Hope this helps,
Best regards,

Jurrien
JurriŽn de Klerk
Visual Productions BV

 

SMF spam blocked by CleanTalk