May 30, 2017, 03:02:06 PM
Read 1817 times
Dear All,
vManager v1.4.27 is now available from
http://www.visualproductions.nl/downloads.html. This vManager is bundled with several new firmwares, please see the release notes below.
/****************************************************************************************
* RELEASE 1.4.27
****************************************************************************************/
Release Date : 2017 April 14
NOTE : Always make a backup of your configuration before performing a firmware
upgrade.
vManager changes: - Factory defaults now restores the DMX direction to input and the GPI
state to digital of the IoCore.
- The reboot button is now enabled for IoCore v1.39.
- Backup and restore compatibility for B-Station firmware 1.26 this
is needed for the new channel.
IoCore v1.39: - Bug fix CueluxPro could not read the DMX input from the IoCore.
- Bug fix the GPI field in the vManager no longer blinks randomly.
- The analog value from the GPI is now shown in status bar.
- GPI to OSC templates have been improved.
- RS-232 task send unsigned, send float and send bool have been improved.
- UDP task send String Hex has been improved.
- UDP messages no longer have an NULL char at the en of the message.
- UDP on the monitor page has been improved.
- UDP messages which use the function Control now work better.
- The task OSC send float will now send a value between 0 and 1 when
the source is a variable.
- Implemented the UDP and OSC API
LPU-1/2 v1.16: - Improved the the ArtPollReply message.
- Bug fix the effects could run to fast.
LPU-2 v1.16: - Added new commands to the API which allow you to increment and
decrement a playbacks intensity and speed.
- Added new commands to the API which allow you to get information
without changing it.
- Added a blackout command to the API.
B-Station v1.27: - New channel for fixtures with cold white support: "cold". And
renamed the channel "white" into "warm".
- New personalities
- Removed trigger flank from UDP and OSC receiving.
- Added template CueCore2 and QuadCore.
- Removed template "Buttons -> OSC Toggle", "Buttons -> OSC with
Feedback" and "Buttons -> 6 cuelists". After removing renamed
"Buttons -> 6 cuelists advanced" to "Buttons -> 6 cuelists".
- Limited input for the task DMX -> Set Value -> Control Offset. Only
valid options are allowed.
- Removed param 2 from the task Cuelist All -> Solo -> Control. This
param did nothing.
- Bug fix a trigger flank could get set on the triggers without a
flank. Which could disable the trigger.
- UDP messages no longer have an NULL char at the en of the message.
- UDP on the monitor page has been improved.
- UDP messages which use the function Control now work better.
- The task OSC send float will now send a value between 0 and 1 when
the source is a variable.
- The trigger Cue change has been renamed into CueIndex. It also
triggers when a cuelist is started next to the normal change. Last
change to this trigger is the removal of the flank.
- New source Randomizer. Works the same way as the randomizer of the
CueCore1 and IoCore.
- Bug fix the task fixture intensity increment and decrement did not
work.
- Implemented the UDP and OSC API
TimeCore v1.00: - Initial release
CueCore2 v1.14 / QuadCore v1.17:
- Bug fix the intensity map could stop the cross fade from one cue to
another.
- New source Action List which triggers when an action list gets
enabled or disabled.
- New playback trigger CueIndex, which gives you the active cue number.
- New playback task jump using control or random jump.
- Bug fix the task action link was shown wrong in the task view.
- Bug some actions could not get linked using the task action link
- Time can now also be set using the text 15.42 to set the hour and
minute.
- New playback master task intensity using inverted-control, toggle,
increment and decrement.
- New playback task intensity inverted-control.
- Bug fix a cue with a duration of 2x would only play 1x or not at all.
- Bug fix the TCP port which is set on the settings page at power up
could not be disabled.
- Bug fix the Learn function could be active on a new action.
- Fixed some miss spelled words.
CueCore2 v1.14: - Removed trigger Binary And + Or
- Changed Binary values to pin1=1, pin2=2, pin3=4 and pin4=8
- Removed the task GPI sample binary. Binary is now updated
automatically.
- New trigger Short press and Long press to the GPI source.
- Bug fix GPI refresh was not working.
Logged
Maarten Engels
Visual Productions BV