Hey,
I have multiple CueCore2 units that I am trying to input DMX into for recording as our wireless network is not reliable enough to send sacn. All three units are on firmware 1.24, with DMX port B set to input, and Show control has DMX -> Universe A HTP.
No DMX passes into the unit from what I can tell. There is no activity on the Monitoring DMX INPUT page for either universe and I do not get anything back out of the box that I am sending in. I have tried using port A with no luck either. I have verified that the DMX signal I am sending to the CueCore2 is valid. DMX output works great on both ports when I use an internal playbacks or sacn.
Any thoughts?
-Tyler F