Visual Productions forum

Author Topic: Kiosc and fader feedback  (Read 2901 times)

March 14, 2018, 06:40:20 PM
Read 2901 times

gpdmrent

  • Member
  • *
  • Posts: 11
Hi to all,
I'm using kiosc with faders and button ,,,,when i press the button "release" on the interface the command works fine for the dmx but not with the feedback on the dimmer fader on the tablet. I'd like that the dimmer fader on the visual interface go to 0% when the lights are off.
Communications ports and ip addresses are ok...the monitor page show the incoming values ......i'm trying to send back a "zero" value for the fader....but don't work...i'm sure i'm missing something....
thanks!!

March 15, 2018, 08:16:14 AM
Reply #1

Michael Chiou

  • Visual Productions
  • Member
  • **
  • Posts: 350
Hello @ gpdmrent,

I am sorry for your inconvenience. I need some more info to help you, are using Kiosc with OSC/UDP or as a kiosc touch screen with one of our cores?

Greetings,

Michael.
Michael Chiou
Visual Productions BV

March 15, 2018, 10:00:07 AM
Reply #2

gpdmrent

  • Member
  • *
  • Posts: 11
Hi michael,
I'm using kiosc with a local file made with kiosc editor.....i'm using it with cuecore2 and action is OSC...

March 15, 2018, 11:17:00 AM
Reply #3

Michael Chiou

  • Visual Productions
  • Member
  • **
  • Posts: 350
Hello @ gpdmrent,

That sounds great, could send us your Kiosc file, and a backup of the CueCore2 so I can't take an actual look on your setup?

Greetings,

Michael.
Michael Chiou
Visual Productions BV

 

SMF spam blocked by CleanTalk