Visual Productions forum

Author Topic: Urgent - personality file request.  (Read 578 times)

July 20, 2018, 09:16:01 PM
Read 578 times


  • Member
  • *
  • Posts: 28
Hi Julian,

I recently requested a personality request for the Aolait 330w 17R.

There are a few issues with it as follows -

1. Fixed gobo is not producing what's on screen?

2. Rotating gobo not working when selected from column, also Rot 2 for rotation not active and greyed out when selected (no red bars)

3. The column (10) to the right of the Rot 2 column is blank but will however select the rotating gobo and have a red box to indicate it's selecting it (pic attached).

4. In colour fix, when selecting a solid colour it doesn't produce that colour once you get upto about the third colour in it starts doing its scrolling fast/slow? Looking at the manual aren't all the half colours meant to be first then the solids? Scroll column works fine, however when you use the random column each increment takes you through the procedure of solid colour then half & half colour, solid colour and so on. (pic attached)

I hope you can have a look asap as I need them for next Wed.

Thanks in advance.  ;)


July 21, 2018, 08:47:12 PM
Reply #1

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3009
I am sorry that evrything is not working as it shoudl so i've made some tests...
The gobo wheels (fixed and rotatingà are showing as they should on my cuelux. But i switched the first and the second wheel this way you can now access the "index" fader for the rotating gobos. ( please find the new version inclued)
The fact that you can select "blanck" gobo from the left column is just a bug from cuelux but there is no effect on it.
For the colors, i've checked the file and the manual and everything fots perfectly so i don't know why it's not working as it should....
I hope this new file will help you a bite
enjoy ;)
Julien Levaufre
Visual Productions BV

July 23, 2018, 08:19:17 PM
Reply #2


  • Member
  • *
  • Posts: 28
Ok, Yeah not sure why it's not working correctly?

I will have a look at this new file and get back to you.

Thanks again



SMF spam blocked by CleanTalk