Visual Productions forum

Author Topic: Chase effects  (Read 795 times)

November 14, 2018, 10:55:33 PM
Read 795 times


  • Member
  • *
  • Posts: 9
How to make Chase effects in cuelux with movingheads?

November 15, 2018, 10:57:47 AM
Reply #1

Bootsy van der Zande

  • Administrator
  • Member
  • *****
  • Posts: 570

You can create a chase manually, use the wizard to create a chase or use a dim FX.

Record a cuelist by manually creating a cuelist, and setting it to chase.
This is explained in detail in chapter 7  section 2 of the Cuelux manual.
To set it to chase is explained in Chapter 7 section 3 of the Cuelux manual.

Use the wizard to create a chase for you, and assign it to a playback. The wizard can be found in the Cue menu (button on the right)
Click on Wizard > Select Chase > add the fixtures you want in the chase > Next > Choose the parameters for your chase > Finish
More on the wizard is in chapter 7 section 5 of the Cuelux manual.

Next go to the Play menu (right under the Cue button) and assign the chase to a Playback using the Assign button on the right.
More on assigning is in chapter 5 section 1 of the Cuelux manual.

Select the fixtures you want in the chase either via the Group menu, the Patch menu or the home screen (Close the current menu by pressing the button a second time)
Above the DIMM fader, select FX > Select an effect type (Sinus, Step, Ramp) > set the size (which in this case is intensity of your effect) > set the Phase (how the effect is spread over your fixtures) > record it to a playback and you're done!


November 15, 2018, 06:17:44 PM
Reply #2


  • Member
  • *
  • Posts: 9
Thank you :)


SMF spam blocked by CleanTalk