Visual Productions forum

Author Topic: Kiosc / B-station. Spectrum picker shifting 1 channel?  (Read 1449 times)

July 10, 2019, 10:46:16 PM
Read 1449 times

PeterR

  • Member
  • *
  • Posts: 2
Hi,

Components used:
B-station (firmware 1.32)
RGB led ( IRGBS ) connected on DMX
KIOSC v 1.8.8
Protocol OSC

From Cuelist in B-station I can manualy adjust Intensity, Red, Green, Blue, Strobe on fixture1
From Kiosc I can adjust Intensity, Cue etc.

What doesn't work is Spectrum. Only Red en Green will light.

In monitor OSC IN:  #FF8F4D   (first value always FF)
In monitor DMX out:
Chan:    1   2   3   4   5
Value:   255   143   077   000   000

Looks like first time touching the spectrum turnes chan1 in 255.
Chan4 stays 000.

It looks like Spectrum only supports chan1-3. (From Cuelist all 5 channels work fine)

Any idea?


Greetings Peter

July 11, 2019, 09:25:41 AM
Reply #1

Bootsy van der Zande

  • Administrator
  • Member
  • *****
  • Posts: 600
Hi Peter,

We currently have a firmware pending that fixes this. The values are always 3 channels though.
But currently the order in which Kiosc sends its colours differs from the way the B-Station expects it.

I can email you the beta software if you're interested.
Otherwise you'd have to wait on a new vManager release for the new firmware.

Greetings,
Bootsy

July 11, 2019, 09:44:26 AM
Reply #2

PeterR

  • Member
  • *
  • Posts: 2
Hi Bootsy,
Thanks for the fast reply.

Surely I'm Interested. (When it's not too much asking)

I was already trying other channel order etc but this doesn't' fix the problem.
Do you have also a  example showcontrol for B-station with example  kiosc file?

Greetings Peter

July 11, 2019, 12:40:47 PM
Reply #3

Bootsy van der Zande

  • Administrator
  • Member
  • *****
  • Posts: 600
Hi Peter,

I've emailed you the firmware, and an example printscreen of ShowControl.

Greetings,
Bootsy

 

SMF spam blocked by CleanTalk