Visual Productions forum

Author Topic: Eurolite - LED KLS-50 (Compact Light Set)  (Read 487 times)

August 18, 2019, 10:38:58 PM
Read 487 times

DJ_Nuno

  • Member
  • *
  • Posts: 5
Hello Forum,

i am totally new in DMX Light Programming and i bought in my favorite music store the Cutety LPU-1.
Now i try to setup the Patch page with my fixtures.
What i could not find is my compact Light Set from Eurolite called LED KLS-50.

Have someone successfully set it up with a Generic model ?

The Manual (German and English) is attached to this topic.
If someone have problems to download here is the Link to the manualpage:
https://www.steinigke.de/download/42109601-Anleitung-81023-1.00-eurolite-led-kls-50-kompakt-lichtset-de_en.pdf

Thanks in advance for help

best regards
Nuno 

August 19, 2019, 11:06:18 AM
Reply #1

Bootsy van der Zande

  • Administrator
  • Member
  • *****
  • Posts: 492
Hi Nuno,

As Cuety does not support subfixtures, the best way to proceed is to put your Eurolite LED KLS-50 in 12 channel mode.
Then you can patch 4 Generic - RGB fixtures to control the lights.

Greetings,
Bootsy

August 20, 2019, 06:32:29 PM
Reply #2

Julien Levaufre

  • Global Moderator
  • Member
  • *****
  • Posts: 2394
    • www.visualproductions.nl
please find included a fixture file to use your new fixture with cuety.
AS Bootsy said, you will only be able to access modes not using subfixtures.
Anyway if you need to use 12ch mode you will be able to patch 4 units of RGB fixture you will find in the Generic manufacturer.
Enjoy! ;)
Julien Levaufre
Visual Productions BV

August 20, 2019, 11:52:07 PM
Reply #3

DJ_Nuno

  • Member
  • *
  • Posts: 5
Hi Bootsy,
Hi Julien,

thanks for your fast response.
So do i understand it right, that i can not use the presets from the KLS-50 between the 2, 3, 4, 5, 15 and 20 channel mode ?

If it s so,  so i need to program it in cuety some cue (scenes) and chases... ??? ...i will handle it some how :-)

So thanks so much for your support

August 21, 2019, 04:37:25 AM
Reply #4

Julien Levaufre

  • Global Moderator
  • Member
  • *****
  • Posts: 2394
    • www.visualproductions.nl
You can only use modes without sub fixtures; 2ch, 3ch and 5 ch are ok and will show up in cuety.
Those modes won't allow you to control each projector separately. If you want to do so, you will have to select 12ch mode and the patch 4 units of rgb projector from the cuety generic manufacturer list. This way you will have 4 RGB LED pars in cuety that will fit the 4 led pars of your fixture
Julien Levaufre
Visual Productions BV

August 22, 2019, 11:19:04 PM
Reply #5

DJ_Nuno

  • Member
  • *
  • Posts: 5
Hi Julien,

some feedback from me about my solution with LED KLS-50.
For using it as Soundcontrolled i tried also the "GENERIC   RGBDS"
I used it with 5CH mode to setup in cuety some presets. I just wanted to mainly use DMX4 and 5 to control dimming and sound control preset.

So if someone search for a similar solution with LED KLS-50 i can recommend to give the GENERIC  RGBDS a try :-)

August 23, 2019, 05:55:18 AM
Reply #6

Julien Levaufre

  • Global Moderator
  • Member
  • *****
  • Posts: 2394
    • www.visualproductions.nl
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk