Visual Productions forum

Author Topic: Fixture Request - Martin Thrill Multi FX LED  (Read 1124 times)

February 25, 2020, 09:09:07 PM
Read 1124 times

Daan1974

  • Member
  • *
  • Posts: 37
Hello,

Can you please provide me with the fixture file for The Martin Thrill Multi FX LED?

For the CUELUX

https://adn.harmanpro.com/site_elements/resources/14884_1533662256/UG_THRILLMultiFXLED_EN_A_original.pdf

Thank you,

Daniel

February 26, 2020, 01:27:53 PM
Reply #1

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
Please find your fixture file included.
enjoy  :D
« Last Edit: March 02, 2020, 02:41:32 AM by Julien Levaufre »
Julien Levaufre
Visual Productions BV

February 26, 2020, 09:52:28 PM
Reply #2

Daan1974

  • Member
  • *
  • Posts: 37

February 26, 2020, 10:15:25 PM
Reply #3

Daan1974

  • Member
  • *
  • Posts: 37
Julien,

I only have 2 channels that i can use. channel 15 and 16 are active (in DMX monitor).
Other functions are not available..what am i doning wrong?

Daniel

February 27, 2020, 07:35:03 AM
Reply #4

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
you just need to select the sub fixtures ( one for the beam effect, one for the strobe and one for the laser). Inside the fixture selection square there are 3 columns you can individually select to control each of them.
Julien Levaufre
Visual Productions BV

February 27, 2020, 10:03:19 PM
Reply #5

Daan1974

  • Member
  • *
  • Posts: 37
Yes found it!

Just one question: i can not find the fader (or buttons) for channel 1.
This is "Multibeam Effects" i can not turn them on, the other funtions are there as i see when i select the third subfixture.

Thanks for your support by the way!

Daniel

February 28, 2020, 02:30:52 AM
Reply #6

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
Great, the multi beam effect selection channel (ch 1) is on the macro parameter of the 3 subfixture!
Enjoy ;)
Julien Levaufre
Visual Productions BV

February 29, 2020, 10:25:30 PM
Reply #7

Daan1974

  • Member
  • *
  • Posts: 37
Julien,

Sorry for the reply again..
There is still something strange.
When i select sub 3 (only this section is blue in Cuelux, without any other activated, also the fixture's mainblock is not blue) and i select the macro's, channel 15 is responding in the DMS Monitor.
That should be channel 1

I also can not find the sound activation button channel 16 (0-10)...
Is there a explanation of the mapping of the buttons and faders comparing to the builder blocks?

Daniel


March 02, 2020, 02:44:13 AM
Reply #8

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
you are right there was a problem with the beam effect macros. It seems it's coming from a cuelux bug so I put the macro parameter on a custom fader. Now it's working!
I've updated the file I joined in my previous post, you can download it again and test.
For the sound activation button, you need to go on the "misc" tab and click the "stand alone" button.
Enjoy ;)
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk