Visual Productions forum

Author Topic: Fixture Request: Showtec RP-405 MKII  (Read 854 times)

March 22, 2020, 01:48:47 AM
Read 854 times

Daan1974

  • Member
  • *
  • Posts: 37
Hello,

Please the fixture file for the Showtec RP-405 MKII (Relay Switchpack, 4 channels)

I have selected the Showtec Multiswitch from the library in ceulux but this fixture starts "On" at value 255 on all 4 channels
I want my switch be at value "0" so there will be no 230V on the output when cuelux starts.
Is it possible to switch on/off by using one button?

Thanks Daniel

March 23, 2020, 05:03:52 AM
Reply #1

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
Please find included the fixture file for your fixture.
Sadly it will be the same behavior than with the other fixture file as the switch control is on the shutter function, and cuelux default is shutter open.
So you can control your switch with the shutter button in the beam page of the programmer and if you want  the shutter to be always closed (off) you can create a cuelist where you set all switches to off, then set this cuelist as "background". This way your switches will always be off except when you will have a cuelist asking to turn them on.
I hope this will help you,
Enjoy ;)
Julien Levaufre
Visual Productions BV

March 24, 2020, 12:40:40 PM
Reply #2

Daan1974

  • Member
  • *
  • Posts: 37

March 25, 2020, 01:31:38 AM
Reply #3

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
Great, thank you for feedback!
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk