Visual Productions forum

Author Topic: LPU-2 in big network environment  (Read 470 times)

October 20, 2021, 12:00:45 PM
Read 470 times

tomaszmoldoch

  • Member
  • *
  • Posts: 3
Is it possible to manually set up ip address of unit to connect to in Cuety App on iPad? I'm working with a big network and wifi network is not giving direct access to VLAN with LPU-2. Routing between VLANs is configured but discovery doesn't work.
How discovery is managed anyway? Is it broadcast 255.255.255.255:16945 like with CueCore/QuadCore devices?

October 22, 2021, 09:57:27 AM
Reply #1

Bootsy van der Zande

  • Administrator
  • Member
  • *****
  • Posts: 478
Hi,

Yes Cuety uses broadcast in a similar way as vManager. It will broadcast discovery to 255.255.255.255 and to the broadcast address based on your IP/subnet, so that could be something like 192.168.1.255. It uses port 16945 as well.

We are planning to add a way of sending a broadcast to a specific IP address in the future, but it might take a while before we get around to doing that in the Cuety app I'm afraid.

Greetings,
Bootsy

October 22, 2021, 01:03:33 PM
Reply #2

tomaszmoldoch

  • Member
  • *
  • Posts: 3
Hi,

thanks very much for info.

One more thing: after connection is established what type of communication is it between app & LPU-2? Is it tcp or udp and on what port?

October 25, 2021, 09:23:13 AM
Reply #3

Bootsy van der Zande

  • Administrator
  • Member
  • *****
  • Posts: 478
Hi,

Then it is all unicast UDP. The destination port on the LPU is always 19645, the sending port is whatever the OS gives Cuety I believe.

Greetings,
Bootsy

 

SMF spam blocked by CleanTalk