Visual Productions forum

Author Topic: Elation Platinum HFX Standard  (Read 1130 times)

November 12, 2021, 08:45:54 PM
Read 1130 times

MylesAway

  • Member
  • *
  • Posts: 136
  • Down at the RadioShack
    • instagram
Hey there, I have tried to fix these issues in vBuilder but I have only had luck by deleting the Auto slider.

Issue 1: On boot channel 19 defaults at 100 which makes the lights start an auto program. Deleting the Auto slider in vBuilder resolved this but also removes access to the auto programs. I am not sure how to have the default value set to 0/

Issue 2: Lamp On/Off, neither works, I can't seem to find the correct way to program this function in vBuilder, I have tried multiple options but none change the value on Channel 19.

Thanks!

November 13, 2021, 06:15:21 AM
Reply #1

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
I did some modifications on the file and checked on cuelux.
Checking on the dmx monitor the channel 19 stay at 0 on boot and the lamp on/off buttons are sending the right values.
I did only the changes on the "standard" mode as it seems this is the one your are using.
I hope this will be ok for you
enjoy ;)
Julien Levaufre
Visual Productions BV

November 14, 2021, 05:01:40 AM
Reply #2

MylesAway

  • Member
  • *
  • Posts: 136
  • Down at the RadioShack
    • instagram
Fantastic! I wish I knew how you did it. Thank you!!

November 14, 2021, 09:36:59 AM
Reply #3

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3234
    • www.visualproductions.nl
Glad it worked.
As you did I took out the custom fader on channel 19 and replaced it by the macro parameter.
As Macro Parameter was used for iris macro I put a custom fader to control this feature.
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk