Visual Productions forum

Author Topic: Direct connection to iMac (what IP should I be using)  (Read 938 times)

April 27, 2022, 03:56:22 PM
Read 938 times


  • Member
  • *
  • Posts: 2
I have my Quadcore connected directly to my iMac via ethernet. Last week it just stopped working at our church. I have no idea what happened. I don't know anything about lighting. Help!

April 27, 2022, 05:19:44 PM
Reply #1


  • Member
  • *
  • Posts: 2
Here is what the settings are now. The quad core has a white pudding light.

April 28, 2022, 09:50:57 AM
Reply #2

Guido Visser

  • Administrator
  • Member
  • *****
  • Posts: 236
    • Visual Productions
Hello Roadthrasher,

It seems your computer and QuadCore are not in the same IP range.
If you are directly connected without a router you can do the following to change this the IP address.

1. In vManger click on options.
2. Look at the list "LOCAL IP ADDRESSES".
3. Close the popup.
4. Select the QuadCore.
5. Click on the IP Address.
6. Click on change.
7. Click on Static.
8. Enter a new IP address.
        Set it to an IP address of your computer +1 or -1. (This list from step 2) Please make sure the IP address you enter does not end with a 0 or 255.
9. Click Ok.
10. You should now be able to use the QuadCore as normal.

Best regards,
Guido Visser
Guido Visser
Visual Productions BV


SMF spam blocked by CleanTalk