Visual Productions forum

Author Topic: B station 2 connection LED don't work  (Read 1970 times)

May 04, 2022, 02:16:42 PM
Read 1970 times

Jörg

  • Member
  • *
  • Posts: 2
Hi,

I got a brand new b station 2 but the white/red LED doesn't work. I connect my b station to a PoE switch and I get the green led signals near the RJ45 plug.

Anybody any idea, maybe a factory reset or so?

Thnx a lot!

Jörg Seifert

May 04, 2022, 02:38:44 PM
Reply #1

Bootsy van der Zande

  • Administrator
  • Member
  • *****
  • Posts: 599
Hi Jörg,

Not sure if I understand correctly, the B-Station2 does not have a red/white heartbeat LED like the CueCore's. It should flash the button leds red or white when you press the button on the back to switch between DHCP (red) and static IP (white). Does that work? Can you see the B-Station2 in vManager?

Greetings,
Bootsy

May 09, 2022, 01:54:53 PM
Reply #2

Jörg

  • Member
  • *
  • Posts: 2
Hi Bootsy,

I don't see the b station in the v manager and the led's don't light up when I push the little button on the backside. I only see the green led's around the RJ45 connector to tell me the b station gets power from the PoE switch ...

grts,

Jörg

May 16, 2022, 10:11:46 AM
Reply #3

Bootsy van der Zande

  • Administrator
  • Member
  • *****
  • Posts: 599
Hi,

I think the B-Station2 might be defective. Please contact  your distributor or support at visualproductions.nl.

Greetings,
Bootsy

 

SMF spam blocked by CleanTalk