Visual Productions forum

Author Topic: Mix Colours on Fader  (Read 1024 times)

October 13, 2022, 05:53:03 PM
Read 1024 times


  • Member
  • *
  • Posts: 1

I want to mix RGB colours on stairville h56. On fader 1 I have red, on fader 2 green and on fader 3 blue. But when fader 1 is on and I will mix this red colour with green on fader 2, fader 2 overwrites my red colour. But actually I want a colour mix with red and green. How will this work?

October 14, 2022, 10:12:46 AM
Reply #1

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3182
I think this is happening because in your fader number 2 you recorded the value of the red channel at 0.
When you record each colour channel on a different fader, you need to be sure that you are recording only the channel you want to control. So after each recording you need to clear completely the programmer, and only move the parameter you want to link to the playback fader.
Doing this you will then have one fader for each colour and will be able to mix then as you wish.
Enjoy ;)
Julien Levaufre
Visual Productions BV


SMF spam blocked by CleanTalk