Hello,
Even if you can create your patch from the Bstation2 web-interface you will have to apply those settings to your fixtures by hand.
The RDM function of the Bstation could do that but your fixture are not compatible with RDM so you will have to do it yourself.
For each fixture you will have to set the DMX address to the same one that you set in the Bstation2 patch screen, and I would advise you to select the 4 channels mode.
-> The address of each fixture needs to be separated by 4. If first fixture is set at 1 then second one will be set at 5.
You can also automatically set the adresses once you have created the virtual personality file, by selecting all the fixtures, click on address, set it to 1 and click OK. All addresses will be set automatically.
Now, in the patch windows, you will have to add a personality to your fixtures.
Select the fixture, and click on personality, then click on Intensity, red, green and blue. This way your personality assigned to your virtual device will fit the DMX charts of the 4 channel mode of your fixture.
Once this is done, you will be able to individually control them from the playback page.