Is it possible to control with one DMX input channel several DMX output channels

[rob]

I have for house lights a setting where the CueCore is giving a nice warm colour setting for a lot of LED fixtures. (RGBAWU units)

When connecting a light desk, each fixture luminance is simple controllable with one channel.

But still i do have to fill in , for each fixture, one DMX channel, to control the output level.

Is there a way in the CueCore to control with one DMX input channel several DMX output channels ?

For example i send a level on DMX channel 512 , and the CueCore is sending out the same channel input value , on channels 10, 20, 30, 40, 50, 60 , 70 , 80, 90, etc etc. (And probably also 512)

[Julien Levaufre]

Could you tell me which cuecore you are using ? CueCore, CueCore2 or CueCore3?
How many individual lights are you controlling with your cuecore?
 

[rob]

CueCore (the normal one)
I have in use about 100 devices

Kunnen we misschien een keer telefonisch contact hebben ? 030-2897856

[Julien Levaufre]

If you are using a Cuecore 1, this will not be doable.
But you can always put all the fixtures to the same DMX address to easily control them in one group.

The other solution, is to use a Cuecore 2 where you will have the 'block' function that will allows you to do exactly what you need.

Enjoy