Cuelux Pro and Cuelux program languages!

[Lukass]

Hello!
I work with both light control programs in English.
I recently looked at the language diversity in the settings. When changing the language settings, there were languages in which the changes were visible, while when changing from English to Latvian, I see that there is no change in the Latvian language, the English language remains the same.
Question: Are you perhaps already working on it? If you are ready to cooperate, I can help with the creation of the Latvian language for both programs. Translate from English to Latvian.
I live in Latvia.
What would be the possibilities of cooperation? It would be a hobby project, for nothing. 
I hope you understood the point of my question.
And one more question:
What about compatibility and support for both programs in Windows 11?
Have a nice day!
Sincerely, L. Klavins

[Julien Levaufre]

Hi Lukas,
You are right the Latvia setting is available but actually nothing is translated.
That is really nice from you to propose your help on this, we are an international company but sadly we do not have anyone from Latvia in our team.

Could you send me an email at support'at'visualproductions'dot'nl, this way I will be able to give you all informations about how to do it.

About your question for Windows 11 compatibility, there is not problem for Cuelux and Cuelux Pro.
Only point is that sometimes when updating to windows eleven, windows delete cuelux usb drivers, so you just need to install them again!

[Lukass]

Hi Julien!
Thanks for the reply.
I sent you an email.
I remembered another important question.
About a week ago, I tested your program with my colleague who bought Diginet manufactured by NA Company which supports Art-net, SSC and other protocols. I connected the computer with NA Diginet through the Internet cable, when I opened the program I added the first universe and specified the ip address, but it failed to start, because neither Cuelux nor Cuelux PRO recognized the device. Then I started reading information on the Internet and on your official website, where I found a sentence that only your original products should be used to get a dmx signal.
Is it true that Cuelux and Cuelux PRO do not support 3rd party devices?
Because I've been working with Chamsys MagiQ for 2 years, which recognizes NA Diginet and other devices that support SSC ART-NET and other protocols, I don't know what's wrong with your program.
If so, Because I have bought a NA Diginet device which cost 2800.00€.
Even if I bought it at CueCore, I probably wouldn't make it in time.
NA Company is a Latvian company that manufactures its equipment in Latvia, maybe you have heard of such a company?
In 6 days I have an event where I want to use Cuelux PRO with Elation Midicon and Capture visualization program but I don't have your CueCore2/3 which unlocks dmx. I have an Emulation dmx adapter that unlocks 512 channels, but as far as I've tried, it only works with Emulation and Cuelux, but not with Cuelux PRO version.
Have a nice day!
L. Klavins

[Julien Levaufre]

I received your email thank you.

You are right Cuelux and Cuelux pro will only work with our interfaces.
In the case of Cuelux ( also called Emulation when sold by Elation) it works only with the Cuelux/emulation cable or box that you already have.
For Cuelux pro /Emulation pro you need to use a CueCore, or CueCore2 or Cuecore3 or Quadcore that will unlock between 2 and 4 universes depending on the product.
Without any of those product you will not have any Output on DMX or Art-net or sACN.

The Cuecore/quadcore family are also really powerful DMX recorder including show control for standalone installations. It's actually their first usage, the compatibility with the Cuelux Pro software being more an add on to create and store the content in the unit.
I hope you will be able to find a solution in time for your event, you can directly control or Latvian distributor LSM distribution: https://www.realpro.lv/lv/veikals/apgaismojums/kontrole/interfaces