Request fixture for Cuety Maxiaxi: Max party bar 1

[Johan Terpstra]

Hello, I would like to request this fixture for Cuety.

Manufacturer: Maxiaxi
Product: Max party bar 10

In the link the DMX protocol table:

https://www.maxiaxi.com/amfile/file/download/file/1686/product/5592/?_gl=1*1uhcxs8*_up*MQ..*_gs*MQ..&gclid=Cj0KCQiA2bTNBhDjARIsAK89wlEAqdjc7jSaFQWMNBYs9E9OCeIHZmpg2GYbVlbwmLBQZLxL0kA7gW0aApIqEALw_wcB&gbraid=0AAAAADo6YHO9KY0E3KQfkyPl70KumEmjq

It would be great to have it.  Thanks! Johan

[François Lonnee]

Johan,

I've gone over the manual, and this is essentially impossible to catch in one mode in one personality file.
If you want the 16 channel mode, we'll have to divide this in 5 sections, and you would have to patch each subfixture separately.
Let us know if that would work for you, or if that makes you run out of room on your LPU.

Cheers,

[Johan Terpstra]

Hello François,

Thank you for checking. Splitting it into 5 subfixtures in the 16 channel mode is perfectly fine for me.
I have enough room on my LPU, so that should not be a problem.

Thanks a lot for your help!

Johan

[François Lonnee]

Hi Johan,

Find your fixture file attached.
Please test before using in a live environment. Since we do not have access to the actual fixture(s) unexpected behaviour may occur

Note:
- Patch each subfixture with their own mode, but ALL with the same start address of the fixture.
-The two PARs are controlled simultaneously, and not separately as I previously assumed.
- Jelly moon motors are under custom 1
- The UV / Strobe bar is under custom 1 and 2

Hope this works for you!

[Johan Terpstra]

Thanks François!

[Johan Terpstra]

Hi Francois,

I have read the manual and also watched Maarten’s YouTube explainer, but I am still not getting it to work.

Do you perhaps have a simple step-by-step guide for how to implement this code on Cuety using a Windows desktop?

I received the fixture code, but I am not sure what the correct workflow is to get it loaded and visible in Cuety on Windows.

If you have a short checklist or the exact steps, that would really help me.

Thanks in advance.

Best regards,
Johan

[Julien Levaufre]

if you are running cuety on windows,
- start cuety
- go in options
- click on the folder icon button on the bottom right
- unzip the user.personality file Francois, in the folder opened in the file explore.
- close and re-start cuety
- go in patch, select some fixture slots
- click on personality
- select the Maxiaxi manufacturer at the top of the list
- you will se you fixture